From: Karun Eagalapati <karun256@xxxxxxxxx> USB headroom is added while submitting the data to URB as per firmware's requirement. This logic is moved to rsi_usb_card_write() so that caller need not worry about it. Signed-off-by: Karun Eagalapati <karun256@xxxxxxxxx> Signed-off-by: Amitkumar Karwar <amit.karwar@xxxxxxxxxxxxxxxxxx> --- drivers/net/wireless/rsi/rsi_91x_usb.c | 41 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index 1d7bb9d..25f6195 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -29,19 +29,24 @@ * Return: status: 0 on success, a negative error code on failure. */ static int rsi_usb_card_write(struct rsi_hw *adapter, - void *buf, + u8 *buf, u16 len, u8 endpoint) { struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; int status; - s32 transfer; + u8 *seg = dev->tx_buffer; + int transfer; + int ep = dev->bulkout_endpoint_addr[endpoint - 1]; + memset(seg, 0, len + RSI_USB_TX_HEAD_ROOM); + memcpy(seg + RSI_USB_TX_HEAD_ROOM, buf, len); + len += RSI_USB_TX_HEAD_ROOM; + transfer = len; status = usb_bulk_msg(dev->usbdev, - usb_sndbulkpipe(dev->usbdev, - dev->bulkout_endpoint_addr[endpoint - 1]), - buf, - len, + usb_sndbulkpipe(dev->usbdev, ep), + (void *)seg, + (int)len, &transfer, HZ * 5); @@ -68,23 +73,19 @@ static int rsi_write_multiple(struct rsi_hw *adapter, u8 *data, u32 count) { - struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev; - u8 *seg = dev->tx_buffer; + struct rsi_91x_usbdev *dev = + (struct rsi_91x_usbdev *)adapter->rsi_dev; - if (dev->write_fail) - return 0; + if (!adapter) + return -ENODEV; - if (endpoint == MGMT_EP) { - memset(seg, 0, RSI_USB_TX_HEAD_ROOM); - memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count); - } else { - seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM); - } + if (endpoint == 0) + return -EINVAL; + + if (dev->write_fail) + return -ENETDOWN; - return rsi_usb_card_write(adapter, - seg, - count + RSI_USB_TX_HEAD_ROOM, - endpoint); + return rsi_usb_card_write(adapter, data, count, endpoint); } /** -- 2.7.4