BSSID has two byte alignment on PCI ioremap correct the write
by swapping to 16 bits first.
This fixes a problem that the device associates fail because
the filter is not set correctly.
Signed-off-by: Malcolm Priestley <tvboxspy@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index a23628f390c9..e03d0a3a6dcc 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -97,8 +97,9 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val)
switch (variable) {
case HW_VAR_BSSID:
- rtl92e_writel(dev, BSSIDR, ((u32 *)(val))[0]);
- rtl92e_writew(dev, BSSIDR+2, ((u16 *)(val+2))[0]);
+ /* BSSIDR 2 byte alignment */
+ rtl92e_writew(dev, BSSIDR, *(u16 *)val);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(val + 2));
break;
case HW_VAR_MEDIA_STATUS:
@@ -961,8 +962,8 @@ static void _rtl92e_net_update(struct net_device *dev)
rtl92e_config_rate(dev, &rate_config);
priv->dot11CurrentPreambleMode = PREAMBLE_AUTO;
priv->basic_rate = rate_config &= 0x15f;
- rtl92e_writel(dev, BSSIDR, ((u32 *)net->bssid)[0]);
- rtl92e_writew(dev, BSSIDR+4, ((u16 *)net->bssid)[2]);
+ rtl92e_writew(dev, BSSIDR, *(u16 *)net->bssid);
+ rtl92e_writel(dev, BSSIDR + 2, *(u32 *)(net->bssid + 2));
if (priv->rtllib->iw_mode == IW_MODE_ADHOC) {
rtl92e_writew(dev, ATIMWND, 2);
--
2.11.0
