Search Linux Wireless

[PATCH v5 7/9] NFC: trf7970a: Enable pins are active high not active low

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The example DTS code for the trf7970a sets the GPIOs for the EN
and EN2 pins to active low when they are really active high so
correct the error.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
index 57cb52c94783..a24a93a4b010 100644
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -36,8 +36,8 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		spi-max-frequency = <2000000>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 0>;
-		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
-				  <&gpio2 5 GPIO_ACTIVE_LOW>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		vin-supply = <&ldo3_reg>;
 		vdd-io-supply = <&ldo2_reg>;
 		autosuspend-delay = <30000>;
-- 
2.12.0




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux