Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/nfc/st21nfca/i2c.c | 62 ++++++++-------------------------------------- 1 file changed, 10 insertions(+), 52 deletions(-) diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c index a04f24334b54..525f72f49b73 100644 --- a/drivers/nfc/st21nfca/i2c.c +++ b/drivers/nfc/st21nfca/i2c.c @@ -61,8 +61,6 @@ #define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" #define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c" -#define ST21NFCA_GPIO_NAME_EN "enable" - struct st21nfca_i2c_phy { struct i2c_client *i2c_dev; struct nfc_hci_dev *hdev; @@ -508,44 +506,10 @@ static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = { {}, }; -static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client) -{ - struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); - struct device *dev = &client->dev; - int ret; - - ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st21nfca_gpios); - if (ret) - return ret; - - /* Get EN GPIO from ACPI */ - phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_LOW); - if (IS_ERR(phy->gpiod_ena)) { - nfc_err(dev, "Unable to get ENABLE GPIO\n"); - return PTR_ERR(phy->gpiod_ena); - } - - return 0; -} - -static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) -{ - struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); - struct device *dev = &client->dev; - - /* Get GPIO from device tree */ - phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_HIGH); - if (IS_ERR(phy->gpiod_ena)) { - nfc_err(dev, "Failed to request enable pin\n"); - return PTR_ERR(phy->gpiod_ena); - } - - return 0; -} - static int st21nfca_hci_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { + struct device *dev = &client->dev; struct st21nfca_i2c_phy *phy; int r; @@ -572,21 +536,15 @@ static int st21nfca_hci_i2c_probe(struct i2c_client *client, mutex_init(&phy->phy_lock); i2c_set_clientdata(client, phy); - if (client->dev.of_node) { - r = st21nfca_hci_i2c_of_request_resources(client); - if (r) { - nfc_err(&client->dev, "No platform data\n"); - return r; - } - } else if (ACPI_HANDLE(&client->dev)) { - r = st21nfca_hci_i2c_acpi_request_resources(client); - if (r) { - nfc_err(&client->dev, "Cannot get ACPI data\n"); - return r; - } - } else { - nfc_err(&client->dev, "st21nfca platform resources not available\n"); - return -ENODEV; + r = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), acpi_st21nfca_gpios); + if (r) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); + + /* Get EN GPIO from resource provider */ + phy->gpiod_ena = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(phy->gpiod_ena)) { + nfc_err(dev, "Unable to get ENABLE GPIO\n"); + return PTR_ERR(phy->gpiod_ena); } phy->se_status.is_ese_present = -- 2.11.0