From: Sara Sharon <sara.sharon@xxxxxxxxx>
When we load firmware in extended mode (as we do by default for
now) driver should send a command what kind of commands ucode
should stop and wait for before proceeding with phy calibrations.
Support this command. Currently we only do NVM access - so mark
this bit only.
Signed-off-by: Sara Sharon <sara.sharon@xxxxxxxxx>
Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx>
---
drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h | 23 +++++++++++++++++++++++
drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 15 +++++++++++++++
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 1 +
3 files changed, 39 insertions(+)
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h
index 5086dc00346c..8302cf03ac28 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api.h
@@ -327,6 +327,7 @@ enum iwl_phy_ops_subcmd_ids {
enum iwl_system_subcmd_ids {
SHARED_MEM_CFG_CMD = 0x0,
+ INIT_EXTENDED_CFG_CMD = 0x03,
};
enum iwl_data_path_subcmd_ids {
@@ -2236,4 +2237,26 @@ struct iwl_nvm_access_complete_cmd {
__le32 reserved;
} __packed; /* NVM_ACCESS_COMPLETE_CMD_API_S_VER_1 */
+/**
+ * enum iwl_extended_cfg_flag - commands driver may send before
+ * finishing init flow
+ * @IWL_INIT_DEBUG_CFG: driver is going to send debug config command
+ * @IWL_INIT_NVM: driver is going to send NVM_ACCESS commands
+ * @IWL_INIT_PHY: driver is going to send PHY_DB commands
+ */
+enum iwl_extended_cfg_flags {
+ IWL_INIT_DEBUG_CFG,
+ IWL_INIT_NVM,
+ IWL_INIT_PHY,
+};
+
+/**
+ * struct iwl_extended_cfg_cmd - mark what commands ucode should wait for
+ * before finishing init flows
+ * @init_flags: values from iwl_extended_cfg_flags
+ */
+struct iwl_init_extended_cfg_cmd {
+ __le32 init_flags;
+} __packed; /* INIT_EXTENDED_CFG_CMD_API_S_VER_1 */
+
#endif /* __fw_api_h__ */
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
index bce3cf5fab67..900f1e25b9da 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -836,6 +836,9 @@ int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
{
struct iwl_notification_wait init_wait;
struct iwl_nvm_access_complete_cmd nvm_complete = {};
+ struct iwl_init_extended_cfg_cmd init_cfg = {
+ .init_flags = cpu_to_le32(BIT(IWL_INIT_NVM)),
+ };
static const u16 init_complete[] = {
INIT_COMPLETE_NOTIF,
};
@@ -857,6 +860,18 @@ int iwl_run_unified_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm)
goto error;
}
+ /* Send init config command to mark that we are sending NVM access
+ * commands
+ */
+ ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(SYSTEM_GROUP,
+ INIT_EXTENDED_CFG_CMD), 0,
+ sizeof(init_cfg), &init_cfg);
+ if (ret) {
+ IWL_ERR(mvm, "Failed to run init config command: %d\n",
+ ret);
+ goto error;
+ }
+
/* Read the NVM only at driver load time, no need to do this twice */
if (read_nvm) {
/* Read nvm */
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
index 488d3c948fe8..888053323c92 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -428,6 +428,7 @@ static const struct iwl_hcmd_names iwl_mvm_legacy_names[] = {
*/
static const struct iwl_hcmd_names iwl_mvm_system_names[] = {
HCMD_NAME(SHARED_MEM_CFG_CMD),
+ HCMD_NAME(INIT_EXTENDED_CFG_CMD),
};
/* Please keep this array *SORTED* by hex value.
--
2.11.0
