Somehow AP doesn't come up and the first scan fails if we don't do VCO calibration every time. The vendor driver duplicates the VCO calibration function into the channel switching logic, we can do the same with less duplication. Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> --- drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index 7135519a638c..870bf315f98b 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -3407,6 +3407,8 @@ static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); } rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); + + rt2800_vco_calibration(rt2x00dev); } static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, -- 2.12.2
