Search Linux Wireless

Re: [1/2] mwifiex: fix use-after-free for FW reinit errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Brian Norris <briannorris@xxxxxxxxxxxx> wrote:
> If we fail to reinit the FW when resetting the device (in the
> synchronous version of mwifiex_init_hw_fw() -> mwifiex_fw_dpc()),
> mwifiex_fw_dpc() will tear down the interface and free up the adapter.
> But we don't actually check for all failure cases of mwifiex_fw_dpc(),
> so some of them fall through and dereference adapter->fw_done with a
> freed adapter, causing a use-after-free bug.
> 
> In any case, mwifiex_fw_dpc() will always signal FW completion -- in the
> error OR success case -- so at best, this was repeat work. Let's not do
> it.
> 
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>

2 patches applied to wireless-drivers-next.git, thanks.

ce8fad9a1f09 mwifiex: fix use-after-free for FW reinit errors
755b37c93a06 mwifiex: catch mwifiex_fw_dpc() errors properly in reset

-- 
https://patchwork.kernel.org/patch/9650725/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux