From: Venkateswara Rao Naralasetty <c_vnaral@xxxxxxxxxxxxxxxx>
If station advertises diffferent NSS capabilities in Rx_mcs set
of HT and VHT IEs in assoc req, the current NSS computation
logic configures the NSS support only based on Rx_mcs set of
HT capabilities in the driver. This is configuring the station
NSS capabilities incorreclty in the target.
For example, if station advertise Rx_mcs set as 2 spatial streams
in HT capabilities and 1 spatial streams in VHT capabilities in
assoc request, as per current logic we are calculating nss from
HT capabilities and the driver sets peer_num_spatial_streams as
2 for the station which is configured in VHT 1*1.
This patchs fix this issue by calculating the nss from VHT cap if
station supports vht.
Signed-off-by: Venkateswara Rao Naralasetty <c_vnaral@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/mac.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 87a9b55..389f369 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2451,6 +2451,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
enum nl80211_band band;
const u16 *vht_mcs_mask;
u8 ampdu_factor;
+ u8 max_nss, vht_mcs;
+ int i;
if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
return;
@@ -2489,6 +2491,18 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
if (sta->bandwidth == IEEE80211_STA_RX_BW_160)
arg->peer_flags |= ar->wmi.peer_flags->bw160;
+ /* Calculate peer NSS capability from VHT capabilities if STA
+ * supports VHT.
+ */
+ for (i = 0, max_nss = 0, vht_mcs = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ vht_mcs = __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) >>
+ (2 * i) & 3;
+
+ if ((vht_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) &&
+ vht_mcs_mask[i])
+ max_nss = i + 1;
+ }
+ arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss);
arg->peer_vht_rates.rx_max_rate =
__le16_to_cpu(vht_cap->vht_mcs.rx_highest);
arg->peer_vht_rates.rx_mcs_set =
--
1.7.9.5
