> Instead of stopping path discovery when a path is found continue > attempting to find paths until we hit the dot11MeshHWMPmaxPREQretries > limit. I am not too sure whether by simply broadcasting the PREQ frame could actually solve the problem and this may cause problem of PREQ flooding in your network when the number of nodes scale. Please take note that all nodes need to rebroadcast the PREQ frame until target STA. Path discovery should stop once the path is established. By attempting 2nd, 3rd or 4th doesn't guarantee the next path will be "good". > This is important because path messages are not reliable and it is > relatively common to have a short bad path to the destination along with a > longer but better path. With the original code rather often a path message > along the long path would be lost so we would stick with the bad path. > With this change we have a greater chance to get messages over the longer > path allowing us to select the long path if it's better. Reduce the mesh_hwmp_active_path_timeout or mesh_path_refresh_time to reestablish your path link as soon as possible. Also, if you would like to have such aggressive behavior, you can reduce the mesh_hwmp_preq_min_interval to have more aggressive PREQ sending in your network. ---- Chun-Yeow
