Search Linux Wireless

Re: Usage of WoWLAN with iwlwifi driver (Device phy0 failed to suspend async: error -16)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> I have been trying to get basic WoWLAN to work with the following
> configuration:
> - Intel Corporation Wireless 7260 (rev 73) with in-tree iwlwifi
> driver

So I just tried on 4.9 with a 6205 NIC and it works there. The
difference must be somewhere in mvm/d3.c then, I guess. I got a lot of
warnings at resume time though, not sure why.

> However, when trying to suspend to RAM ( echo mem > /sys/power/state
> ), I get:
> [46656.403767] dpm_run_callback(): wiphy_suspend+0x0/0x97 [cfg80211]
> returns -16
> [46656.403769] PM: Device phy0 failed to suspend async: error -16
> 

However, I don't see EBUSY anywhere there in the driver.

Can you recompile the kernel and run a quick experiment?

Open drivers/net/wireless/intel/iwlwifi/mvm/mvm.h and put something
like this after the includes:

#undef EBUSY
#define EBUSY ({ WARN_ON(1); 16; })

that should trigger a warning at the place where the EBUSY came from,
assuming it did in fact come from the driver. You could repeat it for
net/mac80211/ieee80211_i.h if that doesn't trigger.

> https://bugzilla.kernel.org/show_bug.cgi?id=109591#c25

That device is like mine, afaict, so this seems to be a different bug.

johannes



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux