Hardware parameters for QCA9377 usb devices.
Signed-off-by: Erik Stromdahl <erik.stromdahl@xxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.c | 23 +++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/hw.h | 1 +
2 files changed, 24 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2e2d3d3..96b278b 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -288,6 +288,29 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.decap_align_bytes = 4,
},
{
+ .id = QCA9377_HW_1_1_DEV_VERSION,
+ .dev_id = QCA9377_1_0_DEVICE_ID,
+ .name = "qca9377 hw1.1 usb",
+ .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+ .uart_pin = 6,
+ .otp_exe_param = 0,
+ .channel_counters_freq_hz = 88000,
+ .max_probe_resp_desc_thres = 0,
+ .cal_data_len = 8124,
+ .fw = {
+ .dir = QCA9377_HW_1_0_FW_DIR,
+ .board = QCA9377_HW_1_0_BOARD_DATA_FILE_USB,
+ .board_size = QCA9377_BOARD_DATA_SZ,
+ .board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+ },
+ .hw_ops = &qca988x_ops,
+ .decap_align_bytes = 4,
+ .max_num_peers = TARGET_QCA9377_HL_NUM_PEERS,
+ .is_high_latency = true,
+ .bus = ATH10K_BUS_USB,
+ .start_once = true,
+ },
+ {
.id = QCA4019_HW_1_0_DEV_VERSION,
.dev_id = 0,
.name = "qca4019 hw1.0",
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index cf88aba..5408ebc 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -127,6 +127,7 @@ enum qca9377_chip_id_rev {
/* QCA9377 1.0 definitions */
#define QCA9377_HW_1_0_FW_DIR ATH10K_FW_DIR "/QCA9377/hw1.0"
#define QCA9377_HW_1_0_BOARD_DATA_FILE "board.bin"
+#define QCA9377_HW_1_0_BOARD_DATA_FILE_USB "board-usb.bin"
#define QCA9377_HW_1_0_PATCH_LOAD_ADDR 0x1234
/* QCA4019 1.0 definitions */
--
2.7.4
