From: Lior David <qca_liord@xxxxxxxxxxxxxxxx>
Add a new value to the oob_mode module parameter for
supporting AP certification.
All enabled values of oob_mode (>0) are intended only
for debugging and diagnostics.
Signed-off-by: Lior David <qca_liord@xxxxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <qca_merez@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wil6210/main.c | 24 ++++++++++++++++++------
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
2 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 3206aea..c33cc4a 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -30,8 +30,8 @@
module_param(debug_fw, bool, 0444);
MODULE_PARM_DESC(debug_fw, " do not perform card reset. For FW debug");
-static bool oob_mode;
-module_param(oob_mode, bool, 0444);
+static u8 oob_mode;
+module_param(oob_mode, byte, 0444);
MODULE_PARM_DESC(oob_mode,
" enable out of the box (OOB) mode in FW, for diagnostics and certification");
@@ -642,13 +642,25 @@ static inline void wil_release_cpu(struct wil6210_priv *wil)
wil_w(wil, RGF_USER_USER_CPU_0, 1);
}
-static void wil_set_oob_mode(struct wil6210_priv *wil, bool enable)
+static void wil_set_oob_mode(struct wil6210_priv *wil, u8 mode)
{
- wil_info(wil, "enable=%d\n", enable);
- if (enable)
+ wil_info(wil, "oob_mode to %d\n", mode);
+ switch (mode) {
+ case 0:
+ wil_c(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE |
+ BIT_USER_OOB_R2_MODE);
+ break;
+ case 1:
+ wil_c(wil, RGF_USER_USAGE_6, BIT_USER_OOB_R2_MODE);
wil_s(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE);
- else
+ break;
+ case 2:
wil_c(wil, RGF_USER_USAGE_6, BIT_USER_OOB_MODE);
+ wil_s(wil, RGF_USER_USAGE_6, BIT_USER_OOB_R2_MODE);
+ break;
+ default:
+ wil_err(wil, "invalid oob_mode: %d\n", mode);
+ }
}
static int wil_target_reset(struct wil6210_priv *wil)
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index cb825cc..fee1891 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -140,6 +140,7 @@ struct RGF_ICR {
#define RGF_USER_USAGE_1 (0x880004)
#define RGF_USER_USAGE_6 (0x880018)
#define BIT_USER_OOB_MODE BIT(31)
+ #define BIT_USER_OOB_R2_MODE BIT(30)
#define RGF_USER_HW_MACHINE_STATE (0x8801dc)
#define HW_MACHINE_BOOT_DONE (0x3fffffd)
#define RGF_USER_USER_CPU_0 (0x8801e0)
--
1.9.1
