Search Linux Wireless

[RFC PATCH 2/2 v2] ath9k_htc: Adjust beacon timers for power save

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Doru Gucea <gucea.doru@xxxxxxxxx>

Each time we receive a beacon we need to adjust the hardware
timers for next DTIM and next TBTT.

Before this commit, the Power Save behaviour was incorrect.
The scenario was:
- STA receives a beacon from AP with TIM unset;
- mac80211 layers puts the chip to sleep;
- chip is woken up by mac80211's software timer reponsible for
beacon miss after 7 * beacon_interval period.

Normally the chip should sleep at most DTIM period. This commit
configures hardware timers for waking up the chip correctly.

More details on the wiki:
https://github.com/doru91/linux-stable/wiki/Single-Interface-Power-Save

Changelog

v1:
* moved beacon configuration call in the ath9k_htc driver

Signed-off-by: Doru Gucea <gucea.doru@xxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index a553c91..5403399 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -1518,6 +1518,10 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 	mutex_lock(&priv->mutex);
 	ath9k_htc_ps_wakeup(priv);
 
+	/* adjust beacon timers */
+	if (changed && BSS_CHANGED_BEACON_INFO)
+		ath9k_htc_beacon_config(priv, vif);
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		ath_dbg(common, CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux