Even if we do not set AMPDU bit in TXWI, device still can aggregate frame and send it with rate not corresponding to requested. That mean we can do not sent probe frames with requested rate. To prevent that use TXOP_BACKOFF for probe frames. Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c index e1660b9..a2c1ca5 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c @@ -372,15 +372,16 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, /* * Determine IFS values - * - Use TXOP_BACKOFF for management frames except beacons + * - Use TXOP_BACKOFF for probe and management frames except beacons * - Use TXOP_SIFS for fragment bursts * - Use TXOP_HTTXOP for everything else * * Note: rt2800 devices won't use CTS protection (if used) * for frames not transmitted with TXOP_HTTXOP */ - if (ieee80211_is_mgmt(hdr->frame_control) && - !ieee80211_is_beacon(hdr->frame_control)) + if ((ieee80211_is_mgmt(hdr->frame_control) && + !ieee80211_is_beacon(hdr->frame_control)) || + (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) txdesc->u.ht.txop = TXOP_BACKOFF; else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) txdesc->u.ht.txop = TXOP_SIFS; -- 1.8.3.1
