Search Linux Wireless

Re: [PATCH V3 2/9] brcmfmac: switch to C function (__brcmf_err) for printing errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2-2-2017 22:33, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
> 
> This will allow extending code and using more detailed messages e.g.
> with the help of dev_err.

Acked-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> V3: Keep IS_ENABLED check in the macro as suggested by Felix
> ---
>  .../net/wireless/broadcom/brcm80211/brcmfmac/common.c    | 16 ++++++++++++++++
>  drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h |  6 +++---
>  2 files changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> index f7c8c2e80349..33b133f7e63a 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> @@ -218,6 +218,22 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
>  	return err;
>  }
>  
> +#ifndef CONFIG_BRCM_TRACING
> +void __brcmf_err(const char *func, const char *fmt, ...)
> +{
> +	struct va_format vaf;
> +	va_list args;
> +
> +	va_start(args, fmt);
> +
> +	vaf.fmt = fmt;
> +	vaf.va = &args;
> +	pr_err("%s: %pV", func, &vaf);
> +
> +	va_end(args);
> +}
> +#endif
> +
>  #if defined(CONFIG_BRCM_TRACING) || defined(CONFIG_BRCMDBG)
>  void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...)
>  {
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
> index 1fe4aa973a92..441a6661eac0 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h
> @@ -45,6 +45,8 @@
>  #undef pr_fmt
>  #define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
>  
> +__printf(2, 3)
> +void __brcmf_err(const char *func, const char *fmt, ...);
>  #ifndef CONFIG_BRCM_TRACING
>  /* Macro for error messages. net_ratelimit() is used when driver
>   * debugging is not selected. When debugging the driver error
> @@ -53,11 +55,9 @@
>  #define brcmf_err(fmt, ...)						\
>  	do {								\
>  		if (IS_ENABLED(CONFIG_BRCMDBG) || net_ratelimit())	\
> -			pr_err("%s: " fmt, __func__, ##__VA_ARGS__);	\
> +			__brcmf_err(__func__, fmt, ##__VA_ARGS__);	\
>  	} while (0)
>  #else
> -__printf(2, 3)
> -void __brcmf_err(const char *func, const char *fmt, ...);
>  #define brcmf_err(fmt, ...) \
>  	__brcmf_err(__func__, fmt, ##__VA_ARGS__)
>  #endif
> 



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux