On Mon, Feb 06, 2017 at 12:52:56PM +0100, Felix Fietkau wrote:
> >> +void mt76x2_set_tx_ackto(struct mt76x2_dev *dev)
> >> +{
> >> + u8 ackto, sifs, slottime = dev->slottime;
> >> +
> >> + slottime += 3 * dev->coverage_class;
> >> +
> >> + sifs = mt76_get_field(dev, MT_XIFS_TIME_CFG,
> >> + MT_XIFS_TIME_CFG_OFDM_SIFS);
> >> +
> >> + ackto = slottime + sifs;
> >> + mt76_rmw_field(dev, MT_TX_TIMEOUT_CFG,
> >> + MT_TX_TIMEOUT_CFG_ACKTO, ackto);
> >> +}
> > Interesting, if this correct way to configure the TX_TIMEOUT_CFG_ACKTO
> > we will also need this in rt2x00. Vendor drivers use 32 for this setting
> > and do not change it.
> I don't think vendor drivers even have support for coverage class.
Even not supporting coverage class (default is 0 anyway) this results
on different setting depending on slot time and sifs. My understanding
is that this is correct approach, compared to constant value used by
vendor.
> >> +static u32
> >> +mt76x2_tx_power_mask(u8 v1, u8 v2, u8 v3, u8 v4)
> >> +{
> >> + u32 val = 0;
> >> +
> >> + val |= (v1 & (BIT(6) - 1)) << 0;
> >> + val |= (v2 & (BIT(6) - 1)) << 8;
> >> + val |= (v3 & (BIT(6) - 1)) << 16;
> >> + val |= (v4 & (BIT(6) - 1)) << 24;
> >> + return val;
> >> +}
> > TX_PWR_CFG registers consist of eight 4bit entries, masking
> > two entries with 0x3f does not seems to be correct.
> No, these registers consist of four 6bit entries. Both the vendor driver
> and the datasheet describe them this way.
That different compared to old devices. I assumed those registers would
not change meaning in MT76, but I guess I was wrong.
> >> +mt76x2_configure_tx_delay(struct mt76x2_dev *dev, enum nl80211_band band, u8 bw)
> >> +{
> >> + u32 cfg0, cfg1;
> >> +
> >> + if (mt76x2_ext_pa_enabled(dev, band)) {
> >> + cfg0 = bw ? 0x000b0c01 : 0x00101101;
> >> + cfg1 = 0x00011414;
> >> + } else {
> >> + cfg0 = bw ? 0x000b0b01 : 0x00101001;
> >> + cfg1 = 0x00021414;
> >> + }
> >> + mt76_wr(dev, MT_TX_SW_CFG0, cfg0);
> >> + mt76_wr(dev, MT_TX_SW_CFG1, cfg1);
> >> +
> >> + mt76_rmw_field(dev, MT_XIFS_TIME_CFG, MT_XIFS_TIME_CFG_CCK_SIFS,
> >> + 13 + (bw ? 1 : 0));
> >> +}
> > SIFS for 2GHz should be 10us and for 5GHz 16us. Setting SIFS to 13
> > or 14 looks wrong for 2GHz band. Can be correct for 5GHz assuming
> > we have some internal delays configured on TX_SW_CFG registers.
> This is a CCK-only SIFS value (there's a separate one for OFDM).
CCK can be used only on 5GHz? OFDM only on 2GHz? I thought any rates can
be used on both bands. Or maybe this settings is just named wrongly
i.e. CCK_SIFS mean sifs for 5GHz and OFDM_SIFS - sifs for 2GHz ?
Stanislaw
