On 2017-02-01 00:30, Ben Greear wrote:
On 01/31/2017 10:41 AM, Ashok Raj Nagarajan wrote:
This patch introduce a new driver callback drv_sta_set_txpwr. This API
will
copy the transmit power value passed from user space and call the
driver
callback to set the tx power for the station.
Signed-off-by: Ashok Raj Nagarajan <arnagara@xxxxxxxxxxxxxxxx>
---
include/net/mac80211.h | 6 ++++++
net/mac80211/cfg.c | 7 +++++++
net/mac80211/driver-ops.c | 21 +++++++++++++++++++++
net/mac80211/driver-ops.h | 5 +++++
net/mac80211/trace.h | 27 +++++++++++++++++++++++++++
5 files changed, 66 insertions(+)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5345d35..e059d5a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1777,6 +1777,8 @@ struct ieee80211_sta_rates {
* This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE
2).
* @support_p2p_ps: indicates whether the STA supports P2P PS
mechanism or not.
* @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by
rate control.
+ * @txpwr: indicates the tx power, in dBm, to be used when sending
data frames
+ * to the STA. Value of 0 means, automatic (default) tx power.
Atheros NICs use 1/2 dBm increments internally, so maybe pass down mBm
to the driver so you don't
loose the granularity? (Other NICs may potentially have even finer
control.)
ath10k firmware expects values to be in dBm and the calculations
regarding 1/2 dBm is taken care in firmware.
Thanks,
Ashok
Thanks,
Ben
