The debugging macros contain a parameter COMP_XX that could be used as a
mask; however, the code turns all these various bits on at the same time.
This change implements them as a proper mask, and adds module parameters
to set the mask at load time.
The current name "debug" for the debug level has been changed to
"debug_level" to better differentiate it from "debug_mask".
The debug routines have also been changed to interrogate the structure
that is loaded at entry time. As a result, the structure rtl_debug is no
longer needed, and all references to it are deleted.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
V2 - renamed debug module parameter
deleted struct rtl_debug
---
drivers/net/wireless/realtek/rtlwifi/base.c | 6 +--
drivers/net/wireless/realtek/rtlwifi/debug.c | 43 +++++-----------------
drivers/net/wireless/realtek/rtlwifi/debug.h | 2 -
drivers/net/wireless/realtek/rtlwifi/pci.c | 10 -----
.../net/wireless/realtek/rtlwifi/rtl8188ee/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8192ce/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c | 10 +++--
.../net/wireless/realtek/rtlwifi/rtl8192de/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8192ee/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8192se/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 11 +++---
.../net/wireless/realtek/rtlwifi/rtl8821ae/sw.c | 11 +++---
drivers/net/wireless/realtek/rtlwifi/usb.c | 1 -
drivers/net/wireless/realtek/rtlwifi/wifi.h | 15 ++------
15 files changed, 70 insertions(+), 105 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
index 13325e1..1b23b24 100644
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -2094,7 +2094,7 @@ static ssize_t rtl_show_debug_level(struct device *d,
struct ieee80211_hw *hw = dev_get_drvdata(d);
struct rtl_priv *rtlpriv = rtl_priv(hw);
- return sprintf(buf, "0x%08X\n", rtlpriv->dbg.global_debuglevel);
+ return sprintf(buf, "0x%08X\n", rtlpriv->cfg->mod_params->debug_level);
}
static ssize_t rtl_store_debug_level(struct device *d,
@@ -2111,10 +2111,10 @@ static ssize_t rtl_store_debug_level(struct device *d,
RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"%s is not in hex or decimal form.\n", buf);
} else {
- rtlpriv->dbg.global_debuglevel = val;
+ rtlpriv->cfg->mod_params->debug_level = val;
RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"debuglevel:%x\n",
- rtlpriv->dbg.global_debuglevel);
+ rtlpriv->cfg->mod_params->debug_level);
}
return strnlen(buf, count);
diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.c b/drivers/net/wireless/realtek/rtlwifi/debug.c
index cd2efac..7ecac611 100644
--- a/drivers/net/wireless/realtek/rtlwifi/debug.c
+++ b/drivers/net/wireless/realtek/rtlwifi/debug.c
@@ -26,35 +26,12 @@
#include <linux/moduleparam.h>
-void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- u8 i;
-
- rtlpriv->dbg.global_debugcomponents =
- COMP_ERR | COMP_FW | COMP_INIT | COMP_RECV | COMP_SEND |
- COMP_MLME | COMP_SCAN | COMP_INTR | COMP_LED | COMP_SEC |
- COMP_BEACON | COMP_RATE | COMP_RXDESC | COMP_DIG | COMP_TXAGC |
- COMP_POWER | COMP_POWER_TRACKING | COMP_BB_POWERSAVING | COMP_SWAS |
- COMP_RF | COMP_TURBO | COMP_RATR | COMP_CMD |
- COMP_EFUSE | COMP_QOS | COMP_MAC80211 | COMP_REGD | COMP_CHAN |
- COMP_EASY_CONCURRENT | COMP_EFUSE | COMP_QOS | COMP_MAC80211 |
- COMP_REGD | COMP_CHAN | COMP_BT_COEXIST;
-
-
- for (i = 0; i < DBGP_TYPE_MAX; i++)
- rtlpriv->dbg.dbgp_type[i] = 0;
-
- /*Init Debug flag enable condition */
-}
-EXPORT_SYMBOL_GPL(rtl_dbgp_flag_init);
-
#ifdef CONFIG_RTLWIFI_DEBUG
void _rtl_dbg_trace(struct rtl_priv *rtlpriv, int comp, int level,
const char *fmt, ...)
{
- if (unlikely((comp & rtlpriv->dbg.global_debugcomponents) &&
- (level <= rtlpriv->dbg.global_debuglevel))) {
+ if (unlikely((comp & rtlpriv->cfg->mod_params->debug_mask) &&
+ (level <= rtlpriv->cfg->mod_params->debug_level))) {
struct va_format vaf;
va_list args;
@@ -63,7 +40,7 @@ void _rtl_dbg_trace(struct rtl_priv *rtlpriv, int comp, int level,
vaf.fmt = fmt;
vaf.va = &args;
- pr_debug(":<%lx> %pV", in_interrupt(), &vaf);
+ pr_info(":<%lx> %pV", in_interrupt(), &vaf);
va_end(args);
}
@@ -73,8 +50,8 @@ EXPORT_SYMBOL_GPL(_rtl_dbg_trace);
void _rtl_dbg_print(struct rtl_priv *rtlpriv, u64 comp, int level,
const char *fmt, ...)
{
- if (unlikely((comp & rtlpriv->dbg.global_debugcomponents) &&
- (level <= rtlpriv->dbg.global_debuglevel))) {
+ if (unlikely((comp & rtlpriv->cfg->mod_params->debug_mask) &&
+ (level <= rtlpriv->cfg->mod_params->debug_level))) {
struct va_format vaf;
va_list args;
@@ -83,7 +60,7 @@ void _rtl_dbg_print(struct rtl_priv *rtlpriv, u64 comp, int level,
vaf.fmt = fmt;
vaf.va = &args;
- pr_debug("%pV", &vaf);
+ pr_info("%pV", &vaf);
va_end(args);
}
@@ -94,10 +71,10 @@ void _rtl_dbg_print_data(struct rtl_priv *rtlpriv, u64 comp, int level,
const char *titlestring,
const void *hexdata, int hexdatalen)
{
- if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) &&
- ((level) <= rtlpriv->dbg.global_debuglevel))) {
- pr_debug("In process \"%s\" (pid %i): %s\n",
- current->comm, current->pid, titlestring);
+ if (unlikely(((comp) & rtlpriv->cfg->mod_params->debug_mask) &&
+ ((level) <= rtlpriv->cfg->mod_params->debug_level))) {
+ pr_info("In process \"%s\" (pid %i): %s\n",
+ current->comm, current->pid, titlestring);
print_hex_dump_bytes("", DUMP_PREFIX_NONE,
hexdata, hexdatalen);
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.h b/drivers/net/wireless/realtek/rtlwifi/debug.h
index 90c670b..bf5339f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/debug.h
+++ b/drivers/net/wireless/realtek/rtlwifi/debug.h
@@ -218,6 +218,4 @@ static inline void RT_PRINT_DATA(struct rtl_priv *rtlpriv,
}
#endif
-
-void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
#endif
diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index 81ac0b3..f6d4dbe 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -2212,16 +2212,6 @@ int rtl_pci_probe(struct pci_dev *pdev,
rtlpriv->intf_ops = &rtl_pci_ops;
rtlpriv->glb_var = &rtl_global_var;
- /*
- *init dbgp flags before all
- *other functions, because we will
- *use it in other funtions like
- *RT_TRACE/RT_PRINT/RTL_PRINT_DATA
- *you can not use these macro
- *before this
- */
- rtl_dbgp_flag_init(hw);
-
/* MEM map */
err = pci_request_regions(pdev, KBUILD_MODNAME);
if (err) {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
index 276c745..7661cfa 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.c
@@ -131,8 +131,6 @@ int rtl88e_init_sw_vars(struct ieee80211_hw *hw)
rtlpci->irq_mask[1] = (u32) (IMR_RXFOVW | 0);
rtlpci->sys_irq_mask = (u32) (HSIMR_PDN_INT_EN | HSIMR_RON_INT_EN);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -276,7 +274,8 @@ static struct rtl_mod_params rtl88ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = false,
.msi_support = true,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
static const struct rtl_hal_cfg rtl88ee_hal_cfg = {
@@ -392,7 +391,8 @@ MODULE_DESCRIPTION("Realtek 8188E 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8188efw.bin");
module_param_named(swenc, rtl88ee_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl88ee_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl88ee_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl88ee_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl88ee_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl88ee_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl88ee_mod_params.fwctrl_lps, bool, 0444);
@@ -404,7 +404,8 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
index 9bd2bff6..efedd91 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/sw.c
@@ -130,8 +130,6 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD | 0);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -247,7 +245,8 @@ static struct rtl_mod_params rtl92ce_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
static const struct rtl_hal_cfg rtl92ce_hal_cfg = {
@@ -364,7 +363,8 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cfwU.bin");
MODULE_FIRMWARE("rtlwifi/rtl8192cfwU_B.bin");
module_param_named(swenc, rtl92ce_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl92ce_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl92ce_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl92ce_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl92ce_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92ce_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92ce_mod_params.fwctrl_lps, bool, 0444);
@@ -372,7 +372,8 @@ MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
index 935e830..96c923b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c
@@ -61,7 +61,6 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->dm.dm_flag = 0;
rtlpriv->dm.disable_framebursting = false;
rtlpriv->dm.thermalvalue = 0;
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
rtlpriv->cfg->mod_params->sw_crypto =
rtlpriv->cfg->mod_params->sw_crypto;
@@ -157,13 +156,16 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
static struct rtl_mod_params rtl92cu_mod_params = {
.sw_crypto = 0,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl92cu_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl92cu_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl92cu_mod_params.debug_mask, ullong, 0644);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
static struct rtl_hal_usbint_cfg rtl92cu_interface_cfg = {
/* rx */
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
index 51463d7..16132c6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/sw.c
@@ -140,8 +140,6 @@ static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -254,7 +252,8 @@ static struct rtl_mod_params rtl92de_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
static const struct rtl_hal_cfg rtl92de_hal_cfg = {
@@ -364,15 +363,17 @@ MODULE_DESCRIPTION("Realtek 8192DE 802.11n Dual Mac PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8192defw.bin");
module_param_named(swenc, rtl92de_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl92de_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl92de_mod_params.debug_level, int, 0644);
module_param_named(ips, rtl92de_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92de_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92de_mod_params.fwctrl_lps, bool, 0444);
+module_param_named(debug_mask, rtl92de_mod_params.debug_mask, ullong, 0644);
MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
index eddc704..554f2dc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
@@ -133,8 +133,6 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
0);
rtlpci->irq_mask[1] = (u32)(IMR_RXFOVW | 0);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -258,7 +256,8 @@ static struct rtl_mod_params rtl92ee_mod_params = {
.swctrl_lps = false,
.fwctrl_lps = true,
.msi_support = true,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
static const struct rtl_hal_cfg rtl92ee_hal_cfg = {
@@ -368,7 +367,8 @@ MODULE_DESCRIPTION("Realtek 8192EE 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8192eefw.bin");
module_param_named(swenc, rtl92ee_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl92ee_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl92ee_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl92ee_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl92ee_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92ee_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92ee_mod_params.fwctrl_lps, bool, 0444);
@@ -380,7 +380,8 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
index 3c66d00..2006b09 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c
@@ -178,8 +178,6 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
rtlpci->first_init = true;
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -297,7 +295,8 @@ static struct rtl_mod_params rtl92se_mod_params = {
.inactiveps = true,
.swctrl_lps = true,
.fwctrl_lps = false,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
};
/* Because memory R/W bursting will cause system hang/crash
@@ -416,7 +415,8 @@ MODULE_DESCRIPTION("Realtek 8192S/8191S 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8192sefw.bin");
module_param_named(swenc, rtl92se_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl92se_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl92se_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl92se_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl92se_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl92se_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl92se_mod_params.fwctrl_lps, bool, 0444);
@@ -424,7 +424,8 @@ MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index 401f542..7bf9f25 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -145,8 +145,6 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
(u32)(PHIMR_RXFOVW |
0);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -268,7 +266,8 @@ static struct rtl_mod_params rtl8723e_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
.msi_support = false,
.disable_watchdog = false,
};
@@ -382,7 +381,8 @@ MODULE_DESCRIPTION("Realtek 8723E 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8723efw.bin");
module_param_named(swenc, rtl8723e_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl8723e_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl8723e_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl8723e_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl8723e_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8723e_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8723e_mod_params.fwctrl_lps, bool, 0444);
@@ -394,7 +394,8 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index dd42c1a..e571b87 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -144,8 +144,6 @@ int rtl8723be_init_sw_vars(struct ieee80211_hw *hw)
HSIMR_RON_INT_EN |
0);
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -271,7 +269,8 @@ static struct rtl_mod_params rtl8723be_mod_params = {
.fwctrl_lps = true,
.msi_support = false,
.disable_watchdog = false,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
.ant_sel = 0,
};
@@ -386,7 +385,8 @@ MODULE_DESCRIPTION("Realtek 8723BE 802.11n PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8723befw.bin");
module_param_named(swenc, rtl8723be_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl8723be_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl8723be_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl8723be_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444);
@@ -399,7 +399,8 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog,
"Set to 1 to disable the watchdog (default 0)\n");
MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
index 220de5f..cd2a53b7 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -160,8 +160,6 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->psc.wo_wlan_mode = WAKE_ON_MAGIC_PACKET |
WAKE_ON_PATTERN_MATCH;
- /* for debug level */
- rtlpriv->dbg.global_debuglevel = rtlpriv->cfg->mod_params->debug;
/* for LPS & IPS */
rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
@@ -309,7 +307,8 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
.fwctrl_lps = true,
.msi_support = true,
.int_clear = true,
- .debug = 0,
+ .debug_level = 0,
+ .debug_mask = 0,
.disable_watchdog = 0,
};
@@ -430,7 +429,8 @@ MODULE_DESCRIPTION("Realtek 8821ae 802.11ac PCI wireless");
MODULE_FIRMWARE("rtlwifi/rtl8821aefw.bin");
module_param_named(swenc, rtl8821ae_mod_params.sw_crypto, bool, 0444);
-module_param_named(debug, rtl8821ae_mod_params.debug, int, 0444);
+module_param_named(debug_level, rtl8821ae_mod_params.debug_level, int, 0644);
+module_param_named(debug_mask, rtl8821ae_mod_params.debug_mask, ullong, 0644);
module_param_named(ips, rtl8821ae_mod_params.inactiveps, bool, 0444);
module_param_named(swlps, rtl8821ae_mod_params.swctrl_lps, bool, 0444);
module_param_named(fwlps, rtl8821ae_mod_params.fwctrl_lps, bool, 0444);
@@ -443,7 +443,8 @@ MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n");
MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n");
MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 1)\n");
-MODULE_PARM_DESC(debug, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
+MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
MODULE_PARM_DESC(disable_watchdog, "Set to 1 to disable the watchdog (default 0)\n");
MODULE_PARM_DESC(int_clear, "Set to 0 to disable interrupt clear before set (default 1)\n");
diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index b2b62ef..20d3fcc 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1073,7 +1073,6 @@ int rtl_usb_probe(struct usb_interface *intf,
rtlpriv->rtlhal.interface = INTF_USB;
rtlpriv->cfg = rtl_hal_cfg;
rtlpriv->intf_ops = &rtl_usb_ops;
- rtl_dbgp_flag_init(hw);
/* Init IO handler */
_rtl_usb_io_handler_init(&udev->dev, hw);
rtlpriv->cfg->ops->read_chip_version(hw);
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index dafe486..262c02a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2221,11 +2221,13 @@ struct rtl_intf_ops {
};
struct rtl_mod_params {
+ /* default: 0,0 */
+ u64 debug_mask;
/* default: 0 = using hardware encryption */
bool sw_crypto;
/* default: 0 = DBG_EMERG (0)*/
- int debug;
+ int debug_level;
/* default: 1 = using no linked power save */
bool inactiveps;
@@ -2345,16 +2347,6 @@ struct rtl_works {
struct work_struct fill_h2c_cmd;
};
-struct rtl_debug {
- u32 dbgp_type[DBGP_TYPE_MAX];
- int global_debuglevel;
- u64 global_debugcomponents;
-
- /* add for proc debug */
- struct proc_dir_entry *proc_dir;
- char proc_name[20];
-};
-
#define MIMO_PS_STATIC 0
#define MIMO_PS_DYNAMIC 1
#define MIMO_PS_NOLIMIT 3
@@ -2583,7 +2575,6 @@ struct rtl_priv {
/* sta entry list for ap adhoc or mesh */
struct list_head entry_list;
- struct rtl_debug dbg;
int max_fw_size;
/*
--
2.10.2
