Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> wrote: > From: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> > > Not clearing the previous tx bit rate status > results in a ambigous tx bit rate reporting to > mac80211/cfg80211, for example the previous bit > rate status would have been marked as legacy rate > , while the current rate would have been an HT/VHT > rate with the tx bit rate flags set and this results > in exporting tx bitrate as legacy rate but with HT/VHT > rate flags set, fix this by clearing the tx bitrate > status for each event. This also fixes the below > warning when we do: > > iw dev wlan#N station dump > > WARNING: net/wireless/util.c:1222 cfg80211 > > [<c022f104>] (warn_slowpath_null) from [<bf3b9adc>] > (cfg80211_calculate_bitrate+0x110/0x1f4 [cfg80211]) > [<bf3b9adc>] (cfg80211_calculate_bitrate [cfg80211]) from > [<bf3dcd54>] (nl80211_put_sta_rate+0x44/0x1dc [cfg80211]) > [<bf3dcd54>] (nl80211_put_sta_rate [cfg80211]) from > [<bf3cbc34>] (nl80211_set_interface+0x724/0xd70 [cfg80211]) > [<bf3cbc34>] (nl80211_set_interface [cfg80211]) from > [<bf3d0a18>] (nl80211_dump_station+0xdc/0x100 [cfg80211]) > [<bf3d0a18>] (nl80211_dump_station [cfg80211]) > > Fixes: cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4") > Signed-off-by: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> Patch applied to ath-next branch of ath.git, thanks. 0f8a2b7772f7 ath10k: fix per station tx bit rate reporting -- https://patchwork.kernel.org/patch/9514989/ Documentation about submitting wireless patches and checking status from patchwork: https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches