On 18-1-2017 11:48, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> This intends to make init/attach process slightly easier to follow.
>
> What driver was doing in brcmf_bus_start wasn't bus specific at all and
> function brcmf_bus_stop wasn't undoing things done there. This function
> is supposed to be called by bus specific code when the bus is ready.
Acked-by: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> V2: Use "brcmf_bus_started" name instead of "brcmf_attach_phase2", don't rename
> brcmf_attach.
> ---
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 +-
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +-
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 2 +-
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> index b5bb971..76693df 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
> @@ -238,7 +238,7 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
> /* Configure the "global" bus state used by upper layers */
> void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
>
> -int brcmf_bus_start(struct device *dev);
> +int brcmf_bus_started(struct device *dev);
> s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len);
> void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> index 3e15d64..5fb4a14 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
> @@ -74,7 +74,7 @@ module_param_named(roamoff, brcmf_roamoff, int, S_IRUSR);
> MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine");
>
> #ifdef DEBUG
> -/* always succeed brcmf_bus_start() */
> +/* always succeed brcmf_bus_started() */
> static int brcmf_ignore_probe_fail;
> module_param_named(ignore_probe_fail, brcmf_ignore_probe_fail, int, 0);
> MODULE_PARM_DESC(ignore_probe_fail, "always succeed probe for debugging");
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> index 372d2c4..b73a55b 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
> @@ -966,7 +966,7 @@ static int brcmf_revinfo_read(struct seq_file *s, void *data)
> return 0;
> }
>
> -int brcmf_bus_start(struct device *dev)
> +int brcmf_bus_started(struct device *dev)
> {
> int ret = -1;
> struct brcmf_bus *bus_if = dev_get_drvdata(dev);
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> index 048027f..19db8f2 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
> @@ -1572,7 +1572,7 @@ static int brcmf_pcie_attach_bus(struct brcmf_pciedev_info *devinfo)
> if (ret) {
> brcmf_err("brcmf_attach failed\n");
> } else {
> - ret = brcmf_bus_start(&devinfo->pdev->dev);
> + ret = brcmf_bus_started(&devinfo->pdev->dev);
> if (ret)
> brcmf_err("dongle is not responding\n");
> }
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> index dfb0658..5298582 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
> @@ -4065,7 +4065,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev,
>
> sdio_release_host(sdiodev->func[1]);
>
> - err = brcmf_bus_start(dev);
> + err = brcmf_bus_started(dev);
> if (err != 0) {
> brcmf_err("dongle is not responding\n");
> goto fail;
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> index 2f978a3..d93ebbd 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
> @@ -1148,7 +1148,7 @@ static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
> if (ret)
> goto fail;
>
> - ret = brcmf_bus_start(devinfo->dev);
> + ret = brcmf_bus_started(devinfo->dev);
> if (ret)
> goto fail;
>
>
