Search Linux Wireless

Re: [PATCH v3 2/2] mmc: pwrseq: add support for Marvell SD8787 chip

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2017/1/16 5:41, Matt Ranostay wrote:
On Thu, Jan 12, 2017 at 11:16 PM, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:
On 2017/1/13 13:29, Matt Ranostay wrote:

Allow power sequencing for the Marvell SD8787 Wifi/BT chip.
This can be abstracted to other chipsets if needed in the future.

Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
---
 drivers/mmc/core/Kconfig         |  10 ++++
 drivers/mmc/core/Makefile        |   1 +
 drivers/mmc/core/pwrseq_sd8787.c | 117
+++++++++++++++++++++++++++++++++++++++
 3 files changed, 128 insertions(+)
 create mode 100644 drivers/mmc/core/pwrseq_sd8787.c

diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index cdfa8520a4b1..fc1ecdaaa9ca 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -12,6 +12,16 @@ config PWRSEQ_EMMC
          This driver can also be built as a module. If so, the module
          will be called pwrseq_emmc.

+config PWRSEQ_SD8787
+       tristate "HW reset support for SD8787 BT + Wifi module"
+       depends on OF && (MWIFIEX || BT_MRVL_SDIO)
+       help
+         This selects hardware reset support for the SD8787 BT + Wifi
+         module. By default this option is set to n.
+
+         This driver can also be built as a module. If so, the module
+         will be called pwrseq_sd8787.
+


I don't like this way, as we have a chance to list lots
configure options here. wifi A,B,C,D...Z, all of them need a
new section here if needed?

Instead, could you just extent pwrseq_simple.c and add you
.compatible = "mmc-pwrseq-sd8787", "mmc-pwrseq-simple"?

You mean all the chipset pwrseqs linked into the pwrseq-simple module?

What I mean was if you just extent the pwrseq-simple a bit, you could
just add your chipset pwrseqs linked into the pwrseq-simple. But if you
need a different *pattern* of pwrseqs, you should need a new name, for
instance, pwrseq-sdio.c etc... But please don't use the name of
sd8787? So if I use a wifi named ABC but using the same pwrseq pattenr,
should I include your "mmc-pwrseq- sd8787" for that or I need a new
mmc-pwrseq-ABC.c?


Ulf your thoughts on this?




 config PWRSEQ_SIMPLE
        tristate "Simple HW reset support for MMC"
        default y
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index b2a257dc644f..0f81464fa824 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -10,6 +10,7 @@ mmc_core-y                    := core.o bus.o host.o \
                                   quirks.o slot-gpio.o
 mmc_core-$(CONFIG_OF)          += pwrseq.o
 obj-$(CONFIG_PWRSEQ_SIMPLE)    += pwrseq_simple.o
+obj-$(CONFIG_PWRSEQ_SD8787)    += pwrseq_sd8787.o
 obj-$(CONFIG_PWRSEQ_EMMC)      += pwrseq_emmc.o
 mmc_core-$(CONFIG_DEBUG_FS)    += debugfs.o
 obj-$(CONFIG_MMC_BLOCK)                += mmc_block.o
diff --git a/drivers/mmc/core/pwrseq_sd8787.c
b/drivers/mmc/core/pwrseq_sd8787.c
new file mode 100644
index 000000000000..f4080fe6439e
--- /dev/null
+++ b/drivers/mmc/core/pwrseq_sd8787.c
@@ -0,0 +1,117 @@
+/*
+ * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi
chip
+ *
+ * Copyright (C) 2016 Matt Ranostay <matt@ranostay.consulting>
+ *
+ * Based on the original work pwrseq_simple.c
+ *  Copyright (C) 2014 Linaro Ltd
+ *  Author: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/mmc/host.h>
+
+#include "pwrseq.h"
+
+struct mmc_pwrseq_sd8787 {
+       struct mmc_pwrseq pwrseq;
+       struct gpio_desc *reset_gpio;
+       struct gpio_desc *pwrdn_gpio;
+};
+
+#define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787,
pwrseq)
+
+static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host *host)
+{
+       struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);
+
+       gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);
+
+       msleep(300);
+       gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1);
+}
+
+static void mmc_pwrseq_sd8787_power_off(struct mmc_host *host)
+{
+       struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);
+
+       gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0);
+       gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
+}
+
+static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops = {
+       .pre_power_on = mmc_pwrseq_sd8787_pre_power_on,
+       .power_off = mmc_pwrseq_sd8787_power_off,
+};
+
+static const struct of_device_id mmc_pwrseq_sd8787_of_match[] = {
+       { .compatible = "mmc-pwrseq-sd8787",},
+       {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mmc_pwrseq_sd8787_of_match);
+
+static int mmc_pwrseq_sd8787_probe(struct platform_device *pdev)
+{
+       struct mmc_pwrseq_sd8787 *pwrseq;
+       struct device *dev = &pdev->dev;
+
+       pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
+       if (!pwrseq)
+               return -ENOMEM;
+
+       pwrseq->pwrdn_gpio = devm_gpiod_get(dev, "pwrdn", GPIOD_OUT_LOW);
+       if (IS_ERR(pwrseq->pwrdn_gpio))
+               return PTR_ERR(pwrseq->pwrdn_gpio);
+
+       pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+       if (IS_ERR(pwrseq->reset_gpio))
+               return PTR_ERR(pwrseq->reset_gpio);
+
+       pwrseq->pwrseq.dev = dev;
+       pwrseq->pwrseq.ops = &mmc_pwrseq_sd8787_ops;
+       pwrseq->pwrseq.owner = THIS_MODULE;
+       platform_set_drvdata(pdev, pwrseq);
+
+       return mmc_pwrseq_register(&pwrseq->pwrseq);
+}
+
+static int mmc_pwrseq_sd8787_remove(struct platform_device *pdev)
+{
+       struct mmc_pwrseq_sd8787 *pwrseq = platform_get_drvdata(pdev);
+
+       mmc_pwrseq_unregister(&pwrseq->pwrseq);
+
+       return 0;
+}
+
+static struct platform_driver mmc_pwrseq_sd8787_driver = {
+       .probe = mmc_pwrseq_sd8787_probe,
+       .remove = mmc_pwrseq_sd8787_remove,
+       .driver = {
+               .name = "pwrseq_sd8787",
+               .of_match_table = mmc_pwrseq_sd8787_of_match,
+       },
+};
+
+module_platform_driver(mmc_pwrseq_sd8787_driver);
+MODULE_LICENSE("GPL v2");



--
Best Regards
Shawn Lin






--
Best Regards
Shawn Lin




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux