Am 13.01.2017 um 11:12 schrieb Johannes Berg <johannes@xxxxxxxxxxxxxxxx>:
> From: Johannes Berg <johannes.berg@xxxxxxxxx>
>
> For a few restructured text warnings in mac80211, making the
> documentation warning-free (for now). Again, this required
> adding trailing whitespace to keep multiple paragraphs in a
> parameter description together.
>
> Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
> ---
> include/net/mac80211.h | 28 ++++++++++++++++++----------
> 1 file changed, 18 insertions(+), 10 deletions(-)
>
> diff --git a/include/net/mac80211.h b/include/net/mac80211.h
> index 86967b85dfd0..228c72617916 100644
> --- a/include/net/mac80211.h
> +++ b/include/net/mac80211.h
> @@ -1771,10 +1771,12 @@ struct ieee80211_sta_rates {
> * @max_amsdu_len: indicates the maximal length of an A-MSDU in bytes. This
> * field is always valid for packets with a VHT preamble. For packets
> * with a HT preamble, additional limits apply:
> - * + If the skb is transmitted as part of a BA agreement, the
> - * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
> - * + If the skb is not part of a BA aggreement, the A-MSDU maximal
> - * size is min(max_amsdu_len, 7935) bytes.
> + *
> + * * If the skb is transmitted as part of a BA agreement, the
> + * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
> + * * If the skb is not part of a BA aggreement, the A-MSDU maximal
> + * size is min(max_amsdu_len, 7935) bytes.
> + *
> * Both additional HT limits must be enforced by the low level driver.
> * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
> * @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
> @@ -3212,14 +3214,20 @@ enum ieee80211_reconfig_type {
> * nor send aggregates in a way that lost frames would exceed the
> * buffer size. If just limiting the aggregate size, this would be
> * possible with a buf_size of 8:
> - * - TX: 1.....7
> - * - RX: 2....7 (lost frame #1)
> - * - TX: 8..1...
> + *
> + * - ``TX: 1.....7``
> + * - ``RX: 2....7`` (lost frame #1)
> + * - ``TX: 8..1...``
> + *
Hi Johannes!
does it make live easier when we use in-line member comments:
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#in-line-member-documentation-comments
and place the entire list in a literalblock?
This is what I (sloppy) tested :
void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
/**
* @ampdu_action: Perform a certain A-MPDU action
*
* The RA/TID combination determines the destination and TID we want
* the ampdu action to be performed for. The action is defined through
* ieee80211_ampdu_mlme_action.
* When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver
* may neither send aggregates containing more subframes than @buf_size
* nor send aggregates in a way that lost frames would exceed the
* buffer size. If just limiting the aggregate size, this would be
* possible with a buf_size of 8::
*
* - TX: 1.....7
* - RX: 2....7 (lost frame #1)
* - TX: 8..1...
*
* which is invalid since #1 was now re-transmitted well past the
* buffer size of 8. Correct ways to retransmit #1 would be::
*
* - TX: 1 or 18 or 81
*
* Even "189" would be wrong since 1 could be lost again.
*
* Returns a negative error code on failure.
* The callback can sleep.
*/
int (*ampdu_action)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_ampdu_params *params);
just my 2cent.
-- Markus --
