Allow power sequencing for the Marvell SD8787 Wifi/BT chip. This can be abstracted to other chipsets if needed in the future. Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> --- drivers/mmc/core/Kconfig | 10 ++++++++++ drivers/mmc/core/Makefile | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index cdfa8520a4b1..fc1ecdaaa9ca 100644 --- a/drivers/mmc/core/Kconfig +++ b/drivers/mmc/core/Kconfig @@ -12,6 +12,16 @@ config PWRSEQ_EMMC This driver can also be built as a module. If so, the module will be called pwrseq_emmc. +config PWRSEQ_SD8787 + tristate "HW reset support for SD8787 BT + Wifi module" + depends on OF && (MWIFIEX || BT_MRVL_SDIO) + help + This selects hardware reset support for the SD8787 BT + Wifi + module. By default this option is set to n. + + This driver can also be built as a module. If so, the module + will be called pwrseq_sd8787. + config PWRSEQ_SIMPLE tristate "Simple HW reset support for MMC" default y diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index b2a257dc644f..0f81464fa824 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -10,6 +10,7 @@ mmc_core-y := core.o bus.o host.o \ quirks.o slot-gpio.o mmc_core-$(CONFIG_OF) += pwrseq.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o +obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o obj-$(CONFIG_MMC_BLOCK) += mmc_block.o -- 2.10.2
