On 28 December 2016 at 22:07, Arend van Spriel
<arend.vanspriel@xxxxxxxxxxxx> wrote:
> On 28-12-16 16:59, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>>
>> They allow specifying hardware limitations of supported channels. This
>> may be useful for specifying single band devices or devices that support
>> only some part of the whole band.
>> E.g. some tri-band routers have separated radios for lower and higher
>> part of 5 GHz band.
>>
>> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
>> ---
>> net/wireless/reg.c | 34 ++++++++++++++++++++++++++++++++++
>> 1 file changed, 34 insertions(+)
>>
>> diff --git a/net/wireless/reg.c b/net/wireless/reg.c
>> index 5dbac37..35ba5c7 100644
>> --- a/net/wireless/reg.c
>> +++ b/net/wireless/reg.c
>> @@ -1123,6 +1123,26 @@ const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
>> }
>> EXPORT_SYMBOL(reg_initiator_name);
>>
>> +static bool reg_center_freq_of_valid(struct wiphy *wiphy,
>> + struct ieee80211_channel *chan)
>> +{
>> + struct device_node *np = wiphy_dev(wiphy)->of_node;
>> + u32 val;
>> +
>> + if (!np)
>> + return true;
>> +
>> + if (!of_property_read_u32(np, "ieee80211-min-center-freq", &val) &&
>> + chan->center_freq < KHZ_TO_MHZ(val))
>> + return false;
>> +
>> + if (!of_property_read_u32(np, "ieee80211-max-center-freq", &val) &&
>> + chan->center_freq > KHZ_TO_MHZ(val))
>> + return false;
>
> I suspect these functions rely on CONFIG_OF. So might not build for
> !CONFIG_OF.
I compiled it with
# CONFIG_OF is not set
Can you test it and provide a non-working config if you see a
compilation error, please?
--
Rafał
