On Wednesday 21 December 2016 08:51 PM, Matteo Grandi wrote: > Hi all again, just an update to the previous message: > > looking at iw list I found this situation: > > Frequencies: > * 5180 MHz [36] (20.0 dBm) > * 5200 MHz [40] (20.0 dBm) > * 5220 MHz [44] (20.0 dBm) > * 5240 MHz [48] (20.0 dBm) > * 5260 MHz [52] (20.0 dBm) (no IR, radar detection) > * 5280 MHz [56] (20.0 dBm) (no IR, radar detection) > * 5300 MHz [60] (20.0 dBm) (no IR, radar detection) > * 5320 MHz [64] (20.0 dBm) (no IR, radar detection) > * 5500 MHz [100] (23.0 dBm) (no IR, radar detection) > * 5520 MHz [104] (23.0 dBm) (no IR, radar detection) > * 5540 MHz [108] (23.0 dBm) (no IR, radar detection) > * 5560 MHz [112] (23.0 dBm) (no IR, radar detection) > * 5580 MHz [116] (23.0 dBm) (no IR, radar detection) > * 5600 MHz [120] (23.0 dBm) (no IR, radar detection) > * 5620 MHz [124] (23.0 dBm) (no IR, radar detection) > * 5640 MHz [128] (23.0 dBm) (no IR, radar detection) > * 5660 MHz [132] (23.0 dBm) (no IR, radar detection) > * 5680 MHz [136] (23.0 dBm) (no IR, radar detection) > * 5700 MHz [140] (23.0 dBm) (no IR, radar detection) > * 5745 MHz [149] (disabled) > * 5765 MHz [153] (disabled) > * 5785 MHz [157] (disabled) > * 5805 MHz [161] (disabled) > * 5825 MHz [165] (disabled) > Supported commands: > * new_interface > * set_interface > * new_key > > The no Initial Radiation prevent the interface to start transmitting. > I'm almost sure that it's a regulatory domain issue, but i already > tried to reinstall the CRD Agent, and even changing the regulatory > domain it change only the global (i.e. CH) while the iw list provide > the same results. > root@MrProper:~# iw reg get > global > country CH: DFS-ETSI > (2402 - 2482 @ 40), (N/A, 20), (N/A) > (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW > (5490 - 5710 @ 160), (N/A, 27), (0 ms), DFS > (57000 - 66000 @ 2160), (N/A, 40), (N/A) > > phy#1 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#0 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > phy#2 > country US: DFS-FCC > (2402 - 2472 @ 40), (N/A, 30), (N/A) > (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW > (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW > (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS > (5735 - 5835 @ 80), (N/A, 30), (N/A) > (57240 - 63720 @ 2160), (N/A, 40), (N/A) > > Is there a way to remove the no IR flags in the allowed channels? I assume you are trying to bring up mesh on one of DFS channels where CAC is mandatory before starting the operation. Perhaps try completing CAC on the channel and bring up mesh. If you want to operate mesh network on channel 52 with 80 Mhz bandwidth, you may need to run cac something like below from iw (a recent one which has support to trigger CAC). sudo iw wlanX cac trigger channel 52 80MHZ Vasanth > > 2016-12-21 15:19 GMT+01:00 Matteo Grandi <iu5bdp@xxxxxxxxx>: >> Dear all, >> >> I'm configuring a simple mesh network using four miniPCIe adapters >> (Compex WLE900VX) on two Gateworks Ventana 5410 boards. >> Actually, based on the guide >> https://wireless.wiki.kernel.org/en/users/drivers/ath10k/mesh >> I don't have any problem setting up the mesh network on channels 36, >> 149, 153, respectively 5180 80 5210, 5745 80 5775, and 5765 80 5795 >> (even if MIMO is not working). >> >> But while configuring the interfaces to work in 80MHz channel >> bandwidth (802.11ac using ath10k driver) on a different channel I >> bump into the error: >> >> command failed: Invalid argument (-22) >> >> immediately after launching the command for joining the mesh: iw dev >> <if_name> mesh join <mesh_name>. >> >> The syslog provide only this: >> >> Dec 21 13:52:03 MrProper kernel: [ 7257.058617] util.c | >> ieee80211_set_wmm_default: ac=0, enable_qos=true, vif.type=7, >> NL80211_IFTYPE_STATION=2 >> Dec 21 13:52:03 MrProper kernel: [ 7257.059654] IPv6: >> ADDRCONF(NETDEV_UP): mpp1: link is not ready >> Dec 21 13:52:03 MrProper kernel: [ 7257.205911] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:03 MrProper kernel: [ 7257.581898] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:03 MrProper kernel: [ 7257.613627] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:04 MrProper kernel: [ 7258.084733] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:04 MrProper kernel: [ 7258.180963] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:04 MrProper kernel: [ 7258.325382] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:04 MrProper kernel: [ 7258.661534] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:05 MrProper kernel: [ 7259.029525] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:05 MrProper kernel: [ 7259.392563] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:08 MrProper kernel: [ 7262.386101] ath10k_warn: 18 >> callbacks suppressed >> Dec 21 13:52:08 MrProper kernel: [ 7262.386154] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7262.737520] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7262.785597] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7262.971144] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7262.981414] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7263.091578] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7263.445603] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7263.458727] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7263.582180] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:09 MrProper kernel: [ 7263.589649] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:14 MrProper kernel: [ 7267.742838] ath10k_warn: 44 >> callbacks suppressed >> Dec 21 13:52:14 MrProper kernel: [ 7267.742887] ath10k_pci >> 0000:07:00.0: no channel configured; ignoring frame(s)! >> Dec 21 13:52:14 MrProper kernel: [ 7267.744466] ath10k_pci >> 0000:07:00.0: no channel >> >> Did someone have a similar issue? >> Are there, maybe, some channels that even present in the regulatory >> domain with the @80 flags are not configurable in this way? (36, 52, >> 100, 116, 132, 149 should be ok, but only 36 and 149 work) >> Or maybe it's my reg-domain issue (see below)? >> >> root@MrProper:~# iw reg get >> global >> country US: DFS-FCC >> (2402 - 2472 @ 40), (N/A, 30), (N/A) >> (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW >> (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW >> (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS >> (5735 - 5835 @ 80), (N/A, 30), (N/A) >> (57240 - 63720 @ 2160), (N/A, 40), (N/A) >> >> phy#1 >> country US: DFS-FCC >> (2402 - 2472 @ 40), (N/A, 30), (N/A) >> (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW >> (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW >> (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS >> (5735 - 5835 @ 80), (N/A, 30), (N/A) >> (57240 - 63720 @ 2160), (N/A, 40), (N/A) >> >> phy#0 >> country US: DFS-FCC >> (2402 - 2472 @ 40), (N/A, 30), (N/A) >> (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW >> (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW >> (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS >> (5735 - 5835 @ 80), (N/A, 30), (N/A) >> (57240 - 63720 @ 2160), (N/A, 40), (N/A) >> >> phy#2 >> country US: DFS-FCC >> (2402 - 2472 @ 40), (N/A, 30), (N/A) >> (5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW >> (5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW >> (5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS >> (5735 - 5835 @ 80), (N/A, 30), (N/A) >> (57240 - 63720 @ 2160), (N/A, 40), (N/A) >> >> >> Thanks a lot for every hint! >> >> Matteo
