Random fixes for rt2800 driver. Stanislaw Gruszka (11): rt2800: make rx ampdu_factor depend on number of rx chains rt2800: don't set ht parameters for non-aggregated frames rt2800: set minimum MPDU and PSDU lengths to sane values rt2800: set MAX_PSDU len according to remote STAs capabilities rt2800: rename adjust_freq_offset function rt2800: warn if doing VCO recalibration for unknow RF chip rt2800: perform VCO recalibration for RF5592 chip rt2x00: merge agc and vco works with link tuner rt2800: replace mdelay by usleep on vco calibration. rt2800: replace msleep() with usleep_range() on channel switch rt2x00: add mutex to synchronize config and link tuner drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 + drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 79 ++++++++++--- drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 2 +- drivers/net/wireless/ralink/rt2x00/rt2x00.h | 6 +- drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 7 +- drivers/net/wireless/ralink/rt2x00/rt2x00lib.h | 31 +----- drivers/net/wireless/ralink/rt2x00/rt2x00link.c | 132 ++++++---------------- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 8 +- drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 12 +- 9 files changed, 124 insertions(+), 155 deletions(-)
