This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
.../net/wireless/realtek/rtlwifi/rtl8821ae/dm.c | 3 +-
.../net/wireless/realtek/rtlwifi/rtl8821ae/fw.c | 11 ++----
.../net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 15 +++-----
.../net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 43 ++++++++--------------
.../net/wireless/realtek/rtlwifi/rtl8821ae/rf.c | 5 +--
.../net/wireless/realtek/rtlwifi/rtl8821ae/sw.c | 14 +++----
6 files changed, 33 insertions(+), 58 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
index bdfd444..32900c5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c
@@ -604,8 +604,7 @@ static void rtl8821ae_dm_find_minimum_rssi(struct ieee80211_hw *hw)
if ((mac->link_state < MAC80211_LINKED) &&
(rtlpriv->dm.entry_min_undec_sm_pwdb == 0)) {
rtl_dm_dig->min_undec_pwdb_for_dm = 0;
- RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
- "Not connected to any\n");
+ pr_debug("rtl8821ae: Not connected to any AP\n");
}
if (mac->link_state >= MAC80211_LINKED) {
if (mac->opmode == NL80211_IFTYPE_AP ||
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
index e8688f4..536c12a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/fw.c
@@ -125,8 +125,7 @@ static void _rtl8821ae_write_fw(struct ieee80211_hw *hw,
remainsize = size % FW_8821AE_PAGE_SIZE;
if (pagenums > 8) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Page numbers should not greater then 8\n");
+ pr_err("Page numbers should not greater then 8\n");
}
for (page = 0; page < pagenums; page++) {
@@ -162,8 +161,7 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
goto exit;
}
- RT_TRACE(rtlpriv, COMP_FW, DBG_EMERG,
- "Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
+ pr_err("Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32);
value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
value32 |= MCUFWDL_RDY;
@@ -186,9 +184,8 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
udelay(FW_8821AE_POLLING_DELAY);
} while (counter++ < FW_8821AE_POLLING_TIMEOUT_COUNT);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
- value32);
+ pr_err("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n",
+ value32);
exit:
return err;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index b045dd0..259984f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -822,9 +822,8 @@ static bool _rtl8821ae_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -1927,7 +1926,7 @@ int rtl8821ae_hw_init(struct ieee80211_hw *hw)
rtstatus = _rtl8821ae_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
return err;
}
@@ -2174,8 +2173,7 @@ static int _rtl8821ae_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
}
@@ -3275,7 +3273,7 @@ void rtl8821ae_read_eeprom_info(struct ieee80211_hw *hw)
rtlefuse->autoload_failflag = false;
_rtl8821ae_read_adapter_info(hw, false);
} else {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
/*hal_ReadRFType_8812A()*/
/* _rtl8821ae_hal_customized_behavior(hw); */
@@ -3950,8 +3948,7 @@ void rtl8821ae_set_key(struct ieee80211_hw *hw, u32 key_index,
if (mac->opmode == NL80211_IFTYPE_AP) {
entry_id = rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC, DBG_EMERG,
- "Can not find free hwsecurity cam entry\n");
+ pr_err("Can not find free hwsecurity cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
index 7e2f7b0..8cffa6f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c
@@ -215,7 +215,6 @@ void rtl8821ae_phy_set_rf_reg(struct ieee80211_hw *hw,
static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
enum radio_path rfpath, u32 offset)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
bool is_pi_mode = false;
u32 retvalue = 0;
@@ -223,7 +222,7 @@ static u32 _rtl8821ae_phy_rf_serial_read(struct ieee80211_hw *hw,
/* 2009/06/17 MH We can not execute IO for power
save or other accident mode.*/
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "return all one\n");
+ pr_err("return all one\n");
return 0xFFFFFFFF;
}
/* <20120809, Kordan> CCA OFF(when entering),
@@ -284,7 +283,7 @@ static void _rtl8821ae_phy_rf_serial_write(struct ieee80211_hw *hw,
u32 newoffset;
if (RT_CANNOT_IO(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "stop\n");
+ pr_err("stop\n");
return;
}
offset &= 0xff;
@@ -1665,7 +1664,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8821ae_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
_rtl8821ae_phy_init_tx_power_by_rate(hw);
@@ -1674,7 +1673,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
@@ -1688,7 +1687,7 @@ static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool)(rtl_get_bbreg(hw,
@@ -2064,8 +2063,7 @@ bool rtl8812ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
break;
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -2132,8 +2130,7 @@ bool rtl8821ae_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
case RF90_PATH_B:
case RF90_PATH_C:
case RF90_PATH_D:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpath);
+ pr_err("switch case %#x not processed\n", rfpath);
break;
}
return true;
@@ -3336,8 +3333,7 @@ void rtl8821ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -3378,8 +3374,7 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
else if (mac->cur_80_prime_sc == PRIME_CHNL_OFFSET_UPPER)
sc_set_40 = VHT_DATA_SC_40_UPPER_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
if ((mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER) &&
(mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_LOWER))
@@ -3394,16 +3389,14 @@ static u8 _rtl8821ae_phy_get_secondary_chnl(struct rtl_priv *rtlpriv)
(mac->cur_80_prime_sc == HAL_PRIME_CHNL_OFFSET_UPPER))
sc_set_20 = VHT_DATA_SC_20_UPPERST_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
} else if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_UPPER)
sc_set_20 = VHT_DATA_SC_20_UPPER_OF_80MHZ;
else if (mac->cur_40_prime_sc == PRIME_CHNL_OFFSET_LOWER)
sc_set_20 = VHT_DATA_SC_20_LOWER_OF_80MHZ;
else
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "SCMapping: Not Correct Primary40MHz Setting\n");
+ pr_err("SCMapping: Not Correct Primary40MHz Setting\n");
}
return (sc_set_40 << 4) | sc_set_20;
}
@@ -3479,8 +3472,7 @@ void rtl8821ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -4660,8 +4652,7 @@ bool rtl8821ae_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
postprocessing = true;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", iotype);
+ pr_err("switch case %#x not processed\n", iotype);
break;
}
} while (false);
@@ -4704,9 +4695,8 @@ static void rtl8821ae_phy_set_io(struct ieee80211_hw *hw)
case IO_CMD_PAUSE_BAND1_DM_BY_SCAN:
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n",
- rtlphy->current_io_type);
+ pr_err("switch case %#x not processed\n",
+ rtlphy->current_io_type);
break;
}
rtlphy->set_io_inprogress = false;
@@ -4811,8 +4801,7 @@ static bool _rtl8821ae_phy_set_rf_power_state(struct ieee80211_hw *hw,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", rfpwr_state);
+ pr_err("switch case %#x not processed\n", rfpwr_state);
bresult = false;
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
index c6ab957..95489f4 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/rf.c
@@ -34,8 +34,6 @@ static bool _rtl8821ae_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
-
switch (bandwidth) {
case HT_CHANNEL_WIDTH_20:
rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, BIT(11)|BIT(10), 3);
@@ -50,8 +48,7 @@ void rtl8821ae_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtl_set_rfreg(hw, RF90_PATH_B, RF_CHNLBW, BIT(11)|BIT(10), 0);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
index 297938e..8ec7ab2 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -192,14 +192,12 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("rtl8821ae: Can't alloc buffer for fw.\n");
return 1;
}
rtlpriv->rtlhal.wowlan_firmware = vzalloc(0x8000);
if (!rtlpriv->rtlhal.wowlan_firmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for wowlan fw.\n");
+ pr_err("rtl8821ae: Can't alloc buffer for wowlan fw.\n");
return 1;
}
@@ -218,8 +216,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request normal firmware!\n");
+ pr_err("rtl8821ae: Failed to request normal firmware!\n");
return 1;
}
/*load wowlan firmware*/
@@ -229,8 +226,7 @@ int rtl8821ae_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_wowlan_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request wowlan firmware!\n");
+ pr_err("rtl8821ae: Failed to request wowlan firmware!\n");
return 1;
}
return 0;
@@ -313,7 +309,7 @@ static struct rtl_mod_params rtl8821ae_mod_params = {
.fwctrl_lps = true,
.msi_support = true,
.int_clear = true,
- .debug = DBG_EMERG,
+ .debug = 0,
.disable_watchdog = 0,
};
--
2.10.2
