This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c | 9 +++------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c | 19 +++++++------------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c | 6 ++----
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c | 18 +++++++-----------
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c | 3 +--
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c | 8 +++-----
6 files changed, 23 insertions(+), 40 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
index 164a27e..25a950e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/fw.c
@@ -99,8 +99,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
while (!bwrite_sucess) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Write H2C fail because no trigger for FW INT!\n");
+ pr_err("Write H2C fail because no trigger for FW INT!\n");
break;
}
@@ -123,8 +122,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
box_extreg = REG_HMEBOX_EXT_3;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", boxnum);
+ pr_err("switch case %#x not processed\n", boxnum);
break;
}
@@ -229,8 +227,7 @@ static void _rtl8723e_fill_h2c_command(struct ieee80211_hw *hw, u8 element_id,
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", cmd_len);
+ pr_err("switch case %#x not processed\n", cmd_len);
break;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
index e0da8dc..bb9de2f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c
@@ -570,9 +570,8 @@ static bool _rtl8723e_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
break;
if (count > POLLING_LLT_THRESHOLD) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to polling write LLT done at address %d!\n",
- address);
+ pr_err("Failed to polling write LLT done at address %d!\n",
+ address);
status = false;
break;
}
@@ -961,7 +960,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
rtlpriv->intf_ops->disable_aspm(hw);
rtstatus = _rtl8712e_init_mac(hw);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Init MAC failed\n");
+ pr_err("Init MAC failed\n");
err = 1;
goto exit;
}
@@ -1107,8 +1106,7 @@ static enum version_8723e _rtl8723e_read_chip_version(struct ieee80211_hw *hw)
"Chip Version ID: VERSION_NORMAL_UMC_CHIP_8723_1T1R_B_CUT.\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Chip Version ID: Unknown. Bug?\n");
+ pr_err("Chip Version ID: Unknown. Bug?\n");
break;
}
@@ -1157,8 +1155,7 @@ static int _rtl8723e_set_media_status(struct ieee80211_hw *hw,
"Set Network type to AP!\n");
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Network type %d not support!\n", type);
+ pr_err("Network type %d not support!\n", type);
return 1;
break;
}
@@ -1852,7 +1849,7 @@ void rtl8723e_read_eeprom_info(struct ieee80211_hw *hw)
} else {
rtlefuse->autoload_failflag = true;
_rtl8723e_read_adapter_info(hw, false);
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+ pr_err("Autoload ERR!!\n");
}
_rtl8723e_hal_customized_behavior(hw);
}
@@ -2245,9 +2242,7 @@ void rtl8723e_set_key(struct ieee80211_hw *hw, u32 key_index,
entry_id =
rtl_cam_get_free_entry(hw, p_macaddr);
if (entry_id >= TOTAL_CAM_ENTRY) {
- RT_TRACE(rtlpriv, COMP_SEC,
- DBG_EMERG,
- "Can not find free hw security cam entry\n");
+ pr_err("Can not find free hw security cam entry\n");
return;
}
} else {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
index 77c1004..c2a6b2c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/led.c
@@ -58,8 +58,7 @@ void rtl8723e_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
rtl_write_byte(rtlpriv, REG_LEDCFG1, ledcfg & 0x10);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = true;
@@ -100,8 +99,7 @@ void rtl8723e_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case %#x not processed\n", pled->ledpin);
+ pr_err("switch case %#x not processed\n", pled->ledpin);
break;
}
pled->ledon = false;
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
index 8001dce..393ac40 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c
@@ -213,7 +213,7 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
rtstatus = _rtl8723e_phy_config_bb_with_headerfile(hw,
BASEBAND_CONFIG_PHY_REG);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Write BB Reg Fail!!\n");
+ pr_err("Write BB Reg Fail!!\n");
return false;
}
@@ -227,13 +227,13 @@ static bool _rtl8723e_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
BASEBAND_CONFIG_PHY_REG);
}
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "BB_PG Reg Fail!!\n");
+ pr_err("BB_PG Reg Fail!!\n");
return false;
}
rtstatus =
_rtl8723e_phy_config_bb_with_headerfile(hw, BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "AGC Table Fail\n");
+ pr_err("AGC Table Fail\n");
return false;
}
rtlphy->cck_high_power = (bool) (rtl_get_bbreg(hw,
@@ -749,8 +749,7 @@ void rtl8723e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
(u8 *)&iotype);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Unknown Scan Backup operation.\n");
+ pr_err("Unknown Scan Backup operation.\n");
break;
}
}
@@ -791,8 +790,7 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
@@ -816,8 +814,7 @@ void rtl8723e_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+ pr_err("unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
break;
}
rtl8723e_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -977,8 +974,7 @@ static bool _rtl8723e_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
currentcmd = &postcommoncmd[*step];
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Invalid 'stage' = %d, Check it!\n", *stage);
+ pr_err("Invalid 'stage' = %d, Check it!\n", *stage);
return true;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
index 4227717..89958b6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/rf.c
@@ -51,8 +51,7 @@ void rtl8723e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
rtlphy->rfreg_chnlval[0]);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "unknown bandwidth: %#X\n", bandwidth);
+ pr_err("unknown bandwidth: %#X\n", bandwidth);
break;
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
index c51a9e8..401f542 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/sw.c
@@ -172,8 +172,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
/* for firmware buf */
rtlpriv->rtlhal.pfirmware = vzalloc(0x6000);
if (!rtlpriv->rtlhal.pfirmware) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't alloc buffer for fw.\n");
+ pr_err("Can't alloc buffer for fw.\n");
return 1;
}
@@ -186,8 +185,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
rtlpriv->io.dev, GFP_KERNEL, hw,
rtl_fw_cb);
if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Failed to request firmware!\n");
+ pr_err("Failed to request firmware!\n");
return 1;
}
return 0;
@@ -270,7 +268,7 @@ static struct rtl_mod_params rtl8723e_mod_params = {
.inactiveps = true,
.swctrl_lps = false,
.fwctrl_lps = true,
- .debug = DBG_EMERG,
+ .debug = 0,
.msi_support = false,
.disable_watchdog = false,
};
--
2.10.2
