Search Linux Wireless

RE: ATH9 driver issues on ARM64

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

After taking some more lecroy traces, we see that after 2nd ASSERT from EP on ARM64 we see continuous data movement of 32 dwords or 12 dwords and never sign of DEASSERT.
Comparatively on working traces (x86) after 2nd assert there are only BAR register reads and writes and then DEASSERT, for almost most of the interrupts and we haven't seen 12 or 32 dwords data movement on this trace.

I did not work on EP wifi/network drivers, any help why EP needs those many number of data at scan time ?

Regards,
Bharat

 
> Hello there,
> 
> as this is a thread about ath9k and ARM64, i'm not sure if i should answer here
> or not, but i have similar "stalls" with ath9k on x86_64 (starting with 4.9rc), stack
> trace is posted down below where the original ARM64 stall traces are.
> 
> Greetings,
> 
> Tobias
> 
> 
> On 08.12.2016 18:36, Kalle Valo wrote:
> > Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxxxxx> writes:
> >
> >>   > [+cc Kalle, ath9k list]
> > Thanks, but please also CC linux-wireless. Full thread below for the
> > folks there.
> >
> >>> On Thu, Dec 08, 2016 at 01:49:42PM +0000, Bharat Kumar Gogada wrote:
> >>>> Hi,
> >>>>
> >>>> Did anyone test Atheros ATH9
> >>>> driver(drivers/net/wireless/ath/ath9k/)
> >>>> on ARM64.  The end point is TP link wifi card with which supports
> >>>> only legacy interrupts.
> >>> If it works on other arches and the arm64 PCI enumeration works, my
> >>> first guess would be an INTx issue, e.g., maybe the driver is
> >>> waiting for an interrupt that never arrives.
> >> We are not sure for now.
> >>>> We are trying to test it on ARM64 with
> >>>> (drivers/pci/host/pcie-xilinx-nwl.c) as root port.
> >>>>
> >>>> EP is getting enumerated and able to link up.
> >>>>
> >>>> But when we start scan system gets hanged.
> >>> When you say the system hangs when you start a scan, I assume you
> >>> mean a wifi scan, not the PCI enumeration.  A problem with a wifi
> >>> scan might cause a *process* to hang, but it shouldn't hang the
> >>> entire system.
> >>>
> >> Yes wifi scan.
> >>>> When we took trace we see that after we start scan assert message
> >>>> is sent but there is no de assert from end point.
> >>> Are you talking about a trace from a PCIe analyzer?  Do you see an
> >>> Assert_INTx PCIe message on the link?
> >>>
> >> Yes lecroy trace, yes we do see Assert_INTx and Deassert_INTx happening
> when we do interface link up.
> >> When we have less debug prints in Atheros driver, and do wifi scan we
> >> see Assert_INTx but never Deassert_INTx,
> >>>> What might cause end point not sending de assert ?
> >>> If the endpoint doesn't send a Deassert_INTx message, I expect that
> >>> would mean the driver didn't service the interrupt and remove the
> >>> condition that caused the device to assert the interrupt in the
> >>> first place.
> >>>
> >>> If the driver didn't receive the interrupt, it couldn't service it,
> >>> of course.  You could add a printk in the ath9k interrupt service
> >>> routine to see if you ever get there.
> >>>
> >> The interrupt behavior is changing w.r.t amount of debug prints we
> >> add. (I kept many prints to aid debug) root@Xilinx-ZCU102-2016_3:~# iw dev
> wlan0 scan
> >> [   83.064675] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.069486] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.074257] ath9k_hw_kill_interrupts	 793
> >> [   83.078260] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.083107] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.087882] ath9k_hw_kill_interrupts	 793
> >> [   83.095450] ath9k_hw_enable_interrupts	 821
> >> [   83.099557] ath9k_hw_enable_interrupts	 825
> >> [   83.103721] ath9k_hw_enable_interrupts	 832
> >> [   83.107887] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.112748] AR_SREV_9100 0
> >> [   83.115438] ath9k_hw_enable_interrupts	 848
> >> [   83.119607] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.124389] ath9k_hw_intrpend	 762
> >> [   83.127761] (AR_SREV_9340(ah) val 0
> >> [   83.131234] ath9k_hw_intrpend	 767
> >> [   83.134628] ath_isr	 603
> >> [   83.137134] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.141995] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.146771] ath9k_hw_kill_interrupts	 793
> >> [   83.150864] ath9k_hw_enable_interrupts	 821
> >> [   83.154971] ath9k_hw_enable_interrupts	 825
> >> [   83.159135] ath9k_hw_enable_interrupts	 832
> >> [   83.163300] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.168161] AR_SREV_9100 0
> >> [   83.170852] ath9k_hw_enable_interrupts	 848
> >> [   83.170855] ath9k_hw_intrpend	 762
> >> [   83.178398] (AR_SREV_9340(ah) val 0
> >> [   83.181873] ath9k_hw_intrpend	 767
> >> [   83.185265] ath_isr	 603
> >> [   83.187773] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.192635] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.197411] ath9k_hw_kill_interrupts	 793
> >> [   83.201414] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.206258] ath9k_hw_enable_interrupts	 821
> >> [   83.210368] ath9k_hw_enable_interrupts	 825
> >> [   83.214531] ath9k_hw_enable_interrupts	 832
> >> [   83.218698] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.223558] AR_SREV_9100 0
> >> [   83.226243] ath9k_hw_enable_interrupts	 848
> >> [   83.226246] ath9k_hw_intrpend	 762
> >> [   83.233794] (AR_SREV_9340(ah) val 0
> >> [   83.237268] ath9k_hw_intrpend	 767
> >> [   83.240661] ath_isr	 603
> >> [   83.243169] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.248030] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.252806] ath9k_hw_kill_interrupts	 793
> >> [   83.256811] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.261651] ath9k_hw_enable_interrupts	 821
> >> [   83.265753] ath9k_hw_enable_interrupts	 825
> >> [   83.269919] ath9k_hw_enable_interrupts	 832
> >> [   83.274083] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.278945] AR_SREV_9100 0
> >> [   83.281630] ath9k_hw_enable_interrupts	 848
> >> [   83.281633] ath9k_hw_intrpend	 762
> >> [   83.281634] (AR_SREV_9340(ah) val 0
> >> [   83.281637] ath9k_hw_intrpend	 767
> >> [   83.281648] ath_isr	 603
> >> [   83.281649] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.281651] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.281654] ath9k_hw_kill_interrupts	 793
> >> [   83.312192] ath9k: ath9k_ioread32 ffffff800a400024
> >> [   83.317030] ath9k_hw_enable_interrupts	 821
> >> [   83.321132] ath9k_hw_enable_interrupts	 825
> >> [   83.325297] ath9k_hw_enable_interrupts	 832
> >> [   83.329463] ath9k: ath9k_iowrite32 ffffff800a400024
> >> [   83.334324] AR_SREV_9100 0
> >> [   83.337014] ath9k_hw_enable_interrupts	 848
> >> ..
> >> ..
> >> This log continues until I turn off board without obtaining scanning result.
> >>
> >> In between I get following cpu stall outputs :
> >>    230.457179] INFO: rcu_sched self-detected stall on CPU
> >> [  230.457185] 	2-...: (31314 ticks this GP)
> idle=2d1/140000000000001/0 softirq=1400/1400 fqs=36713
> >> [  230.457189] 	 (t=36756 jiffies g=161 c=160 q=16169)
> >> [  230.457191] Task dump for CPU 2:
> >> [  230.457196] kworker/u8:4    R  running task        0  1342      2 0x00000002
> >> [  230.457207] Workqueue: phy0 ieee80211_scan_work [  230.457208]
> >> Call trace:
> >> [  230.457214] [<ffffff8008089860>] dump_backtrace+0x0/0x198 [
> >> 230.457219] [<ffffff8008089a0c>] show_stack+0x14/0x20 [  230.457224]
> >> [<ffffff80080c0930>] sched_show_task+0x98/0xf8 [  230.457228]
> >> [<ffffff80080c2628>] dump_cpu_task+0x40/0x50 [  230.457233]
> >> [<ffffff80080e14a8>] rcu_dump_cpu_stacks+0xa0/0xf0 [  230.457239]
> >> [<ffffff80080e4cd8>] rcu_check_callbacks+0x468/0x748 [  230.457243]
> >> [<ffffff80080e7cfc>] update_process_times+0x3c/0x68 [  230.457249]
> >> [<ffffff80080f6dfc>] tick_sched_handle.isra.5+0x3c/0x50
> >> [  230.457253] [<ffffff80080f6e54>] tick_sched_timer+0x44/0x90 [
> >> 230.457257] [<ffffff80080e86b0>] __hrtimer_run_queues+0xf0/0x178
> >> ** 10 printk messages dropped ** [  230.457302] f8c0:
> >> 0000000000000000 0000000005f5e0ff 000000000001379a
> 3866666666666620 [
> >> 230.457306] f8e0: ffffff800a1b4065 0000000000000006 ffffff800a129000
> >> ffffffc87b8010a8 [  230.457310] f900: ffffff808a1b4057
> >> ffffff800a1c3000 ffffff800a1b3000 ffffff800a13b000 [  230.457314]
> >> f920: 0000000000000140 0000000000000006 ffffff800a1b3b10
> >> ffffff800a1c39e8 [  230.457318] f940: 000000000000002f
> >> ffffff800a1b8a98 ffffff800a1b3ae8 ffffffc87b07f990 [  230.457322]
> >> f960: ffffff80080d6230 ffffffc87b07f990 ffffff80080d6234
> >> 0000000060000145
> >> ** 1 printk messages dropped ** [  230.457329] [<ffffff8008085720>]
> >> el1_irq+0xa0/0x100
> >> ** 9 printk messages dropped ** [  230.457373] [<ffffff800885ad60>]
> >> ieee80211_hw_config+0x50/0x290 [  230.457377] [<ffffff8008863690>]
> >> ieee80211_scan_work+0x1f8/0x480 [  230.457383] [<ffffff80080b15d0>]
> >> process_one_work+0x120/0x378 [  230.457386] [<ffffff80080b1870>]
> >> worker_thread+0x48/0x4b0 [  230.457391] [<ffffff80080b7108>]
> >> kthread+0xd0/0xe8 [  230.457395] [<ffffff8008085dd0>]
> ret_from_fork+0x10/0x40
> >> [  230.480389] ath9k_hw_intrpend	 762
> >>
> >>
> >> [  545.487987] ath9k: ath9k_ioread32 ffffff800a400024 [  545.526189]
> >> INFO: rcu_sched self-detected stall on CPU
> >> [  545.526195] 	2-...: (97636 ticks this GP)
> idle=2d1/140000000000001/0 softirq=1400/1400 fqs=115374
> >> [  545.526199] 	 (t=115523 jiffies g=161 c=160 q=51066)
> >> [  545.526201] Task dump for CPU 2:
> >> [  545.526206] kworker/u8:4    R  running task        0  1342      2 0x00000002
> >> ** 3 printk messages dropped ** [  545.526231] [<ffffff8008089a0c>]
> >> show_stack+0x14/0x20
> >> ** 9 printk messages dropped ** [  545.526280] [<ffffff80086a71e8>]
> >> arch_timer_handler_phys+0x30/0x40 [  545.526284] [<ffffff80080dbe18>]
> >> handle_percpu_devid_irq+0x78/0xa0 [  545.526291] [<ffffff80080d760c>]
> >> generic_handle_irq+0x24/0x38 [  545.526296] [<ffffff80080d7944>]
> >> __handle_domain_irq+0x5c/0xb8 [  545.526299] [<ffffff80080824bc>]
> >> gic_handle_irq+0x64/0xc0 [  545.526302] Exception stack(0xffffffc87b07f870
> to 0xffffffc87b07f990)
> >> [  545.526306] f860:                                   0000000000009732 ffffff800a1eaaa8
> >> ** 8 printk messages dropped ** [  545.526341] f980: ffffff800a1c39e8
> >> 0000000000000036 [  545.526345] [<ffffff8008085720>]
> >> el1_irq+0xa0/0x100 [  545.526349] [<ffffff80080d6234>]
> >> console_unlock+0x384/0x5b0 [  545.526353] [<ffffff80080d673c>]
> >> vprintk_emit+0x2dc/0x4b0 [  545.526357] [<ffffff80080d6a50>]
> >> vprintk_default+0x38/0x40 [  545.526362] [<ffffff8008129704>]
> >> printk+0x58/0x60 [  545.526366] [<ffffff800859e3e4>]
> >> ath9k_iowrite32+0x9c/0xa8 [  545.526372] [<ffffff80085c7ca8>]
> >> ath9k_hw_kill_interrupts+0x28/0xf0
> >> [  545.526376] [<ffffff80085a18ec>] ath_reset+0x24/0x68
> >> ** 2 printk messages dropped ** [  545.526391] [<ffffff800885ad60>]
> ieee80211_hw_config+0x50/0x290
> >> ** 11 printk messages dropped ** [  545.532834] ath9k_hw_kill_interrupts
> 	 793
> >> [  545.532890] ath9k_hw_enable_interrupts	 821
> 
> [   81.876902] INFO: rcu_preempt detected stalls on CPUs/tasks:
> [   81.876912]     Tasks blocked on level-0 rcu_node (CPUs 0-7): P0
> [   81.876932]     (detected by 4, t=60002 jiffies, g=1873, c=1872, q=4967)
> [   81.876936] swapper/4       R  running task        0     0      1
> 0x00000000
> [   81.876941]  0000000000000001 ffffffff810725f6 ffff88017edbc240
> ffffffff81a3dc40
> [   81.876945]  ffffffff81101e46 ffff88025ef173c0 ffffffff81a3dc40
> ffffffff81a3dc40
> [   81.876948]  00000000ffffffff ffffffff810a7333 ffff88017ecee698
> ffff88017edbc240
> [   81.876951] Call Trace:
> [   81.876970]  <IRQ>
> [   81.876979]  [<ffffffff810725f6>] ? sched_show_task+0xd6/0x140
> [   81.876983]  [<ffffffff81101e46>] ?
> rcu_print_detail_task_stall_rnp+0x40/0x61
> [   81.876989]  [<ffffffff810a7333>] ? rcu_check_callbacks+0x6b3/0x8c0
> [   81.876993]  [<ffffffff810b8350>] ? tick_sched_handle.isra.14+0x40/0x40
> [   81.876996]  [<ffffffff810aa4c3>] ? update_process_times+0x23/0x50
> [   81.876999]  [<ffffffff810b8383>] ? tick_sched_timer+0x33/0x60
> [   81.877002]  [<ffffffff810aaf09>] ? __hrtimer_run_queues+0xb9/0x150
> [   81.877004]  [<ffffffff810ab198>] ? hrtimer_interrupt+0x98/0x1a0
> [   81.877008]  [<ffffffff81031b1e>] ?
> smp_trace_apic_timer_interrupt+0x5e/0x90
> [   81.877012]  [<ffffffff815b31bf>] ? apic_timer_interrupt+0x7f/0x90
> [   81.877013]  <EOI>
> [   81.877017]  [<ffffffff8147f28d>] ? cpuidle_enter_state+0x13d/0x1f0
> [   81.877019]  [<ffffffff8147f289>] ? cpuidle_enter_state+0x139/0x1f0
> [   81.877021]  [<ffffffff81088c19>] ? cpu_startup_entry+0x139/0x210
> [   81.877027]  [<ffffffff8102fc9e>] ? start_secondary+0x13e/0x170
> [   81.877029] swapper/4       R  running task        0     0      1
> 0x00000000
> [   81.877032]  0000000000000001 ffffffff810725f6 ffff88017edbc240
> ffffffff81a3dc40
> [   81.877035]  ffffffff81101e46 ffff88025ef173c0 ffffffff81a3dc40
> ffffffff81a3dc40
> [   81.877038]  00000000ffffffff ffffffff810a7368 ffff88017ecee698
> ffff88017edbc240
> [   81.877041] Call Trace:
> [   81.877045]  <IRQ>
> [   81.877049]  [<ffffffff810725f6>] ? sched_show_task+0xd6/0x140
> [   81.877051]  [<ffffffff81101e46>] ?
> rcu_print_detail_task_stall_rnp+0x40/0x61
> [   81.877055]  [<ffffffff810a7368>] ? rcu_check_callbacks+0x6e8/0x8c0
> [   81.877058]  [<ffffffff810b8350>] ? tick_sched_handle.isra.14+0x40/0x40
> [   81.877060]  [<ffffffff810aa4c3>] ? update_process_times+0x23/0x50
> [   81.877063]  [<ffffffff810b8383>] ? tick_sched_timer+0x33/0x60
> [   81.877065]  [<ffffffff810aaf09>] ? __hrtimer_run_queues+0xb9/0x150
> [   81.877068]  [<ffffffff810ab198>] ? hrtimer_interrupt+0x98/0x1a0
> [   81.877070]  [<ffffffff81031b1e>] ?
> smp_trace_apic_timer_interrupt+0x5e/0x90
> [   81.877073]  [<ffffffff815b31bf>] ? apic_timer_interrupt+0x7f/0x90
> [   81.877074]  <EOI>
> [   81.877076]  [<ffffffff8147f28d>] ? cpuidle_enter_state+0x13d/0x1f0
> [   81.877078]  [<ffffffff8147f289>] ? cpuidle_enter_state+0x139/0x1f0
> [   81.877080]  [<ffffffff81088c19>] ? cpu_startup_entry+0x139/0x210
> [   81.877084]  [<ffffffff8102fc9e>] ? start_secondary+0x13e/0x170
> [   91.132787] INFO: rcu_preempt detected expedited stalls on
> CPUs/tasks: { P0 } 63785 jiffies s: 505 root: 0x0/T
> [   91.132796] blocking rcu_node structures:
> 
> >>
> >>
> >> But if we have less debug prints it does not reach EP handler
> >> sometimes, due to following Condition in "kernel/irq/chip.c" in
> >> function handle_simple_irq
> >>
> >> if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
> >>                  desc->istate |= IRQS_PENDING;
> >>                  goto out_unlock;
> >>          }
> >> Here irqd_irq_disabled is being set to 1.
> >>
> >> With lesser debug prints it stops after following prints:
> >> root@Xilinx-ZCU102-2016_3:~# iw dev wlan0 scan
> >> [   54.781045] ath9k_hw_kill_interrupts	 793
> >> [   54.785007] ath9k_hw_kill_interrupts	 793
> >> [   54.792535] ath9k_hw_enable_interrupts	 821
> >> [   54.796642] ath9k_hw_enable_interrupts	 825
> >> [   54.800807] ath9k_hw_enable_interrupts	 832
> >> [   54.804973] AR_SREV_9100 0
> >> [   54.807663] ath9k_hw_enable_interrupts	 848
> >> [   54.811843] ath9k_hw_intrpend	 762
> >> [   54.815211] (AR_SREV_9340(ah) val 0
> >> [   54.818684] ath9k_hw_intrpend	 767
> >> [   54.822078] ath_isr	 603
> >> [   54.824587] ath9k_hw_kill_interrupts	 793
> >> [   54.828601] ath9k_hw_enable_interrupts	 821
> >> [   54.832750] ath9k_hw_enable_interrupts	 825
> >> [   54.836916] ath9k_hw_enable_interrupts	 832
> >> [   54.841082] AR_SREV_9100 0
> >> [   54.843772] ath9k_hw_enable_interrupts	 848
> >> [   54.843775] ath9k_hw_intrpend	 762
> >> [   54.851319] (AR_SREV_9340(ah) val 0
> >> [   54.854793] ath9k_hw_intrpend	 767
> >> [   54.858185] ath_isr	 603
> >> [   54.860696] ath9k_hw_kill_interrupts	 793
> >> [   54.864776] ath9k_hw_enable_interrupts	 821
> >> [   54.867061] ath9k_hw_kill_interrupts	 793
> >> [   54.872870] ath9k_hw_enable_interrupts	 825
> >> [   54.877036] ath9k_hw_enable_interrupts	 832
> >> [   54.881202] AR_SREV_9100 0
> >> [   54.883892] ath9k_hw_enable_interrupts	 848
> >> [   75.963129] INFO: rcu_sched detected stalls on CPUs/tasks:
> >> [   75.968602] 	0-...: (2 GPs behind) idle=9d5/140000000000001/0
> softirq=1103/1109 fqs=519
> >> [   75.976675] 	(detected by 2, t=5274 jiffies, g=64, c=63, q=11)
> >> [   75.982485] Task dump for CPU 0:
> >> [   75.985696] ksoftirqd/0     R  running task        0     3      2 0x00000002
> >> [   75.992726] Call trace:
> >> [   75.995165] [<ffffff8008086b3c>] __switch_to+0xc4/0xd0
> >> [   76.000281] [<ffffffc87b830500>] 0xffffffc87b830500
> >> [  139.059027] INFO: rcu_sched detected stalls on CPUs/tasks:
> >> [  139.064430] 	0-...: (2 GPs behind) idle=9d5/140000000000001/0
> softirq=1103/1109 fqs=2097
> >> [  139.072593] 	(detected by 2, t=21049 jiffies, g=64, c=63, q=11)
> >> [  139.078489] Task dump for CPU 0:
> >> [  139.081700] ksoftirqd/0     R  running task        0     3      2 0x00000002
> >> [  139.088731] Call trace:
> >> [  139.091165] [<ffffff8008086b3c>] __switch_to+0xc4/0xd0 [
> >> 139.096285] [<ffffffc87b830500>] 0xffffffc87b830500
> >>
> >>
> >>>> We are not seeing any issues on 32-bit ARM platform and X86
> >>>> platform.
> >>> Can you collect a dmesg log (or, if the system hang means you can't
> >>> collect that, a console log with "ignore_loglevel"), and "lspci -vv"
> >>> output as root?  That should have clues about whether the INTx got
> >>> routed correctly.  /proc/interrupts should also show whether we're
> >>> receiving interrupts from the device.
> >> Here is the lspci output:
> >> 00:00.0 PCI bridge: Xilinx Corporation Device d022 (prog-if 00 [Normal
> decode])
> >> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> 	Latency: 0
> >> 	Interrupt: pin A routed to IRQ 224
> >> 	Bus: primary=00, secondary=01, subordinate=0c, sec-latency=0
> >> 	I/O behind bridge: 00000000-00000fff
> >> 	Memory behind bridge: e0000000-e00fffff
> >> 	Prefetchable memory behind bridge: 00000000fff00000-
> 00000000000fffff
> >> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- <SERR- <PERR-
> >> 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
> >> 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> >> 	Capabilities: [40] Power Management version 3
> >> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold-)
> >> 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> >> 	Capabilities: [60] Express (v2) Root Port (Slot-), MSI 00
> >> 		DevCap:	MaxPayload 256 bytes, PhantFunc 0
> >> 			ExtTag- RBE+
> >> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >> 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> >> 			MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend+
> >> 		LnkCap:	Port #0, Speed 5GT/s, Width x2, ASPM not supported,
> Exit Latency L0s unlimited, L1 unlimited
> >> 			ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
> >> 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >> 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
> CRSVisible+
> >> 		RootCap: CRSVisible+
> >> 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> >> 		DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-,
> OBFF Not Supported ARIFwd-
> >> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
> OBFF Disabled ARIFwd-
> >> 		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> >> 			 Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >> 			 Compliance De-emphasis: -6dB
> >> 		LnkSta2: Current De-emphasis Level: -3.5dB,
> EqualizationComplete-, EqualizationPhase1-
> >> 			 EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >> 	Capabilities: [100 v1] Device Serial Number 00-00-00-00-00-00-00-00
> >> 	Capabilities: [10c v1] Virtual Channel
> >> 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
> >> 		Arb:	Fixed- WRR32- WRR64- WRR128-
> >> 		Ctrl:	ArbSelect=Fixed
> >> 		Status:	InProgress-
> >> 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
> >> 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >> 			Status:	NegoPending- InProgress-
> >> 	Capabilities: [128 v1] Vendor Specific Information: ID=1234 Rev=1
> >> Len=018 <?>
> >>
> >> 01:00.0 Network controller: Qualcomm Atheros AR93xx Wireless Network
> Adapter (rev 01)
> >> 	Subsystem: Qualcomm Atheros Device 3112
> >> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- DisINTx-
> >> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> 	Latency: 0, Cache Line Size: 128 bytes
> >> 	Interrupt: pin A routed to IRQ 224
> >> 	Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=128K]
> >> 	[virtual] Expansion ROM at e0020000 [disabled] [size=64K]
> >> 	Capabilities: [40] Power Management version 3
> >> 		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
> >> 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >> 	Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
> >> 		Address: 0000000000000000  Data: 0000
> >> 		Masking: 00000000  Pending: 00000000
> >> 	Capabilities: [70] Express (v2) Endpoint, MSI 00
> >> 		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency
> L0s <1us, L1 <8us
> >> 			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> SlotPowerLimit 0.000W
> >> 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> >> 			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> >> 			MaxPayload 128 bytes, MaxReadReq 512 bytes
> >> 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
> TransPend-
> >> 		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
> Latency L0s <2us, L1 <64us
> >> 			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> >> 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >> 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> 		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> >> 		DevCap2: Completion Timeout: Not Supported, TimeoutDis+,
> LTR-, OBFF Not Supported
> >> 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
> OBFF Disabled
> >> 		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-
> >> 			 Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> >> 			 Compliance De-emphasis: -6dB
> >> 		LnkSta2: Current De-emphasis Level: -6dB,
> EqualizationComplete-, EqualizationPhase1-
> >> 			 EqualizationPhase2-, EqualizationPhase3-,
> LinkEqualizationRequest-
> >> 	Capabilities: [100 v1] Advanced Error Reporting
> >> 		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >> 		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> >> 		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> >> 		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr-
> >> 		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout-
> NonFatalErr+
> >> 		AERCap:	First Error Pointer: 00, GenCap- CGenEn-
> ChkCap- ChkEn-
> >> 	Capabilities: [140 v1] Virtual Channel
> >> 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
> >> 		Arb:	Fixed- WRR32- WRR64- WRR128-
> >> 		Ctrl:	ArbSelect=Fixed
> >> 		Status:	InProgress-
> >> 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> >> 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128-
> WRR256-
> >> 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> >> 			Status:	NegoPending- InProgress-
> >> 	Capabilities: [300 v1] Device Serial Number 00-00-00-00-00-00-00-00
> >> 	Kernel driver in use: ath9k
> >>
> >> Here is the cat /proc/interrupts (after we do interface up):
> >>
> >> root@:~# ifconfig wlan0 up
> >> [ 1548.926601] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
> >> root@Xilinx-ZCU102-2016_3:~# cat /proc/interrupts
> >>             CPU0       CPU1       CPU2       CPU3
> >>    1:          0          0          0          0     GICv2  29 Edge      arch_timer
> >>    2:      19873      20058      19089      17435     GICv2  30 Edge      arch_timer
> >>   12:          0          0          0          0     GICv2 156 Level     zynqmp-dma
> >>   13:          0          0          0          0     GICv2 157 Level     zynqmp-dma
> >>   14:          0          0          0          0     GICv2 158 Level     zynqmp-dma
> >>   15:          0          0          0          0     GICv2 159 Level     zynqmp-dma
> >>   16:          0          0          0          0     GICv2 160 Level     zynqmp-dma
> >>   17:          0          0          0          0     GICv2 161 Level     zynqmp-dma
> >>   18:          0          0          0          0     GICv2 162 Level     zynqmp-dma
> >>   19:          0          0          0          0     GICv2 163 Level     zynqmp-dma
> >>   20:          0          0          0          0     GICv2 164 Level     Mali_GP_MMU,
> Mali_GP, Mali_PP0_MMU, Mali_PP0, Mali_PP1_MMU, Mali_PP1
> >>   30:          0          0          0          0     GICv2  95 Level     eth0, eth0
> >> 206:        314          0          0          0     GICv2  49 Level     cdns-i2c
> >> 207:         40          0          0          0     GICv2  50 Level     cdns-i2c
> >> 209:          0          0          0          0     GICv2 150 Level     nwl_pcie:misc
> >> 214:         12          0          0          0     GICv2  47 Level     ff0f0000.spi
> >> 215:          0          0          0          0     GICv2  58 Level     ffa60000.rtc
> >> 216:          0          0          0          0     GICv2  59 Level     ffa60000.rtc
> >> 217:          0          0          0          0     GICv2 165 Level     ahci-
> ceva[fd0c0000.ahci]
> >> 218:         61          0          0          0     GICv2  81 Level     mmc0
> >> 219:          0          0          0          0     GICv2 187 Level     arm-smmu global fault
> >> 220:        471          0          0          0     GICv2  53 Level     xuartps
> >> 223:          0          0          0          0     GICv2 154 Level     fd4c0000.dma
> >> 224:          3          0          0          0     dummy   1 Edge      ath9k
> >> 225:          0          0          0          0     GICv2  97 Level     xhci-hcd:usb1
> >>
> >> Regards,
> >> Bharat





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux