Search Linux Wireless

[PATCH 4/4] wil6210: align to latest auto generated wmi.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lior David <qca_liord@xxxxxxxxxxxxxxxx>

Align to latest version of the auto generated wmi file
describing the interface with FW.

Signed-off-by: Lior David <qca_liord@xxxxxxxxxxxxxxxx>
Signed-off-by: Maya Erez <qca_merez@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/wil6210/wmi.h | 392 ++++++++++++++++++++++-----------
 1 file changed, 264 insertions(+), 128 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 2cc7775..d93a4d4 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -35,6 +35,7 @@
 #define WMI_MAC_LEN			(6)
 #define WMI_PROX_RANGE_NUM		(3)
 #define WMI_MAX_LOSS_DMG_BEACONS	(20)
+#define MAX_NUM_OF_SECTORS		(128)
 
 /* Mailbox interface
  * used for commands and events
@@ -68,144 +69,149 @@ struct wmi_cmd_hdr {
 
 /* List of Commands */
 enum wmi_command_id {
-	WMI_CONNECT_CMDID			= 0x01,
-	WMI_DISCONNECT_CMDID			= 0x03,
-	WMI_DISCONNECT_STA_CMDID		= 0x04,
-	WMI_START_SCAN_CMDID			= 0x07,
-	WMI_SET_BSS_FILTER_CMDID		= 0x09,
-	WMI_SET_PROBED_SSID_CMDID		= 0x0A,
-	WMI_SET_LISTEN_INT_CMDID		= 0x0B,
-	WMI_BCON_CTRL_CMDID			= 0x0F,
-	WMI_ADD_CIPHER_KEY_CMDID		= 0x16,
-	WMI_DELETE_CIPHER_KEY_CMDID		= 0x17,
-	WMI_PCP_CONF_CMDID			= 0x18,
-	WMI_SET_APPIE_CMDID			= 0x3F,
-	WMI_SET_WSC_STATUS_CMDID		= 0x41,
-	WMI_PXMT_RANGE_CFG_CMDID		= 0x42,
-	WMI_PXMT_SNR2_RANGE_CFG_CMDID		= 0x43,
-	WMI_MEM_READ_CMDID			= 0x800,
-	WMI_MEM_WR_CMDID			= 0x801,
-	WMI_ECHO_CMDID				= 0x803,
-	WMI_DEEP_ECHO_CMDID			= 0x804,
-	WMI_CONFIG_MAC_CMDID			= 0x805,
-	WMI_CONFIG_PHY_DEBUG_CMDID		= 0x806,
-	WMI_ADD_DEBUG_TX_PCKT_CMDID		= 0x808,
-	WMI_PHY_GET_STATISTICS_CMDID		= 0x809,
-	WMI_FS_TUNE_CMDID			= 0x80A,
-	WMI_CORR_MEASURE_CMDID			= 0x80B,
-	WMI_READ_RSSI_CMDID			= 0x80C,
-	WMI_TEMP_SENSE_CMDID			= 0x80E,
-	WMI_DC_CALIB_CMDID			= 0x80F,
-	WMI_SEND_TONE_CMDID			= 0x810,
-	WMI_IQ_TX_CALIB_CMDID			= 0x811,
-	WMI_IQ_RX_CALIB_CMDID			= 0x812,
-	WMI_SET_UCODE_IDLE_CMDID		= 0x813,
-	WMI_SET_WORK_MODE_CMDID			= 0x815,
-	WMI_LO_LEAKAGE_CALIB_CMDID		= 0x816,
-	WMI_MARLON_R_READ_CMDID			= 0x818,
-	WMI_MARLON_R_WRITE_CMDID		= 0x819,
-	WMI_MARLON_R_TXRX_SEL_CMDID		= 0x81A,
-	MAC_IO_STATIC_PARAMS_CMDID		= 0x81B,
-	MAC_IO_DYNAMIC_PARAMS_CMDID		= 0x81C,
-	WMI_SILENT_RSSI_CALIB_CMDID		= 0x81D,
-	WMI_RF_RX_TEST_CMDID			= 0x81E,
-	WMI_CFG_RX_CHAIN_CMDID			= 0x820,
-	WMI_VRING_CFG_CMDID			= 0x821,
-	WMI_BCAST_VRING_CFG_CMDID		= 0x822,
-	WMI_VRING_BA_EN_CMDID			= 0x823,
-	WMI_VRING_BA_DIS_CMDID			= 0x824,
-	WMI_RCP_ADDBA_RESP_CMDID		= 0x825,
-	WMI_RCP_DELBA_CMDID			= 0x826,
-	WMI_SET_SSID_CMDID			= 0x827,
-	WMI_GET_SSID_CMDID			= 0x828,
-	WMI_SET_PCP_CHANNEL_CMDID		= 0x829,
-	WMI_GET_PCP_CHANNEL_CMDID		= 0x82A,
-	WMI_SW_TX_REQ_CMDID			= 0x82B,
-	WMI_READ_MAC_RXQ_CMDID			= 0x830,
-	WMI_READ_MAC_TXQ_CMDID			= 0x831,
-	WMI_WRITE_MAC_RXQ_CMDID			= 0x832,
-	WMI_WRITE_MAC_TXQ_CMDID			= 0x833,
-	WMI_WRITE_MAC_XQ_FIELD_CMDID		= 0x834,
-	WMI_MLME_PUSH_CMDID			= 0x835,
-	WMI_BEAMFORMING_MGMT_CMDID		= 0x836,
-	WMI_BF_TXSS_MGMT_CMDID			= 0x837,
-	WMI_BF_SM_MGMT_CMDID			= 0x838,
-	WMI_BF_RXSS_MGMT_CMDID			= 0x839,
-	WMI_BF_TRIG_CMDID			= 0x83A,
-	WMI_LINK_MAINTAIN_CFG_WRITE_CMDID	= 0x842,
-	WMI_LINK_MAINTAIN_CFG_READ_CMDID	= 0x843,
-	WMI_SET_SECTORS_CMDID			= 0x849,
-	WMI_MAINTAIN_PAUSE_CMDID		= 0x850,
-	WMI_MAINTAIN_RESUME_CMDID		= 0x851,
-	WMI_RS_MGMT_CMDID			= 0x852,
-	WMI_RF_MGMT_CMDID			= 0x853,
-	WMI_THERMAL_THROTTLING_CTRL_CMDID	= 0x854,
-	WMI_THERMAL_THROTTLING_GET_STATUS_CMDID	= 0x855,
-	WMI_OTP_READ_CMDID			= 0x856,
-	WMI_OTP_WRITE_CMDID			= 0x857,
-	WMI_LED_CFG_CMDID			= 0x858,
+	WMI_CONNECT_CMDID				= 0x01,
+	WMI_DISCONNECT_CMDID				= 0x03,
+	WMI_DISCONNECT_STA_CMDID			= 0x04,
+	WMI_START_SCAN_CMDID				= 0x07,
+	WMI_SET_BSS_FILTER_CMDID			= 0x09,
+	WMI_SET_PROBED_SSID_CMDID			= 0x0A,
+	WMI_SET_LISTEN_INT_CMDID			= 0x0B,
+	WMI_BCON_CTRL_CMDID				= 0x0F,
+	WMI_ADD_CIPHER_KEY_CMDID			= 0x16,
+	WMI_DELETE_CIPHER_KEY_CMDID			= 0x17,
+	WMI_PCP_CONF_CMDID				= 0x18,
+	WMI_SET_APPIE_CMDID				= 0x3F,
+	WMI_SET_WSC_STATUS_CMDID			= 0x41,
+	WMI_PXMT_RANGE_CFG_CMDID			= 0x42,
+	WMI_PXMT_SNR2_RANGE_CFG_CMDID			= 0x43,
+	WMI_MEM_READ_CMDID				= 0x800,
+	WMI_MEM_WR_CMDID				= 0x801,
+	WMI_ECHO_CMDID					= 0x803,
+	WMI_DEEP_ECHO_CMDID				= 0x804,
+	WMI_CONFIG_MAC_CMDID				= 0x805,
+	WMI_CONFIG_PHY_DEBUG_CMDID			= 0x806,
+	WMI_ADD_DEBUG_TX_PCKT_CMDID			= 0x808,
+	WMI_PHY_GET_STATISTICS_CMDID			= 0x809,
+	WMI_FS_TUNE_CMDID				= 0x80A,
+	WMI_CORR_MEASURE_CMDID				= 0x80B,
+	WMI_READ_RSSI_CMDID				= 0x80C,
+	WMI_TEMP_SENSE_CMDID				= 0x80E,
+	WMI_DC_CALIB_CMDID				= 0x80F,
+	WMI_SEND_TONE_CMDID				= 0x810,
+	WMI_IQ_TX_CALIB_CMDID				= 0x811,
+	WMI_IQ_RX_CALIB_CMDID				= 0x812,
+	WMI_SET_UCODE_IDLE_CMDID			= 0x813,
+	WMI_SET_WORK_MODE_CMDID				= 0x815,
+	WMI_LO_LEAKAGE_CALIB_CMDID			= 0x816,
+	WMI_MARLON_R_READ_CMDID				= 0x818,
+	WMI_MARLON_R_WRITE_CMDID			= 0x819,
+	WMI_MARLON_R_TXRX_SEL_CMDID			= 0x81A,
+	MAC_IO_STATIC_PARAMS_CMDID			= 0x81B,
+	MAC_IO_DYNAMIC_PARAMS_CMDID			= 0x81C,
+	WMI_SILENT_RSSI_CALIB_CMDID			= 0x81D,
+	WMI_RF_RX_TEST_CMDID				= 0x81E,
+	WMI_CFG_RX_CHAIN_CMDID				= 0x820,
+	WMI_VRING_CFG_CMDID				= 0x821,
+	WMI_BCAST_VRING_CFG_CMDID			= 0x822,
+	WMI_VRING_BA_EN_CMDID				= 0x823,
+	WMI_VRING_BA_DIS_CMDID				= 0x824,
+	WMI_RCP_ADDBA_RESP_CMDID			= 0x825,
+	WMI_RCP_DELBA_CMDID				= 0x826,
+	WMI_SET_SSID_CMDID				= 0x827,
+	WMI_GET_SSID_CMDID				= 0x828,
+	WMI_SET_PCP_CHANNEL_CMDID			= 0x829,
+	WMI_GET_PCP_CHANNEL_CMDID			= 0x82A,
+	WMI_SW_TX_REQ_CMDID				= 0x82B,
+	WMI_READ_MAC_RXQ_CMDID				= 0x830,
+	WMI_READ_MAC_TXQ_CMDID				= 0x831,
+	WMI_WRITE_MAC_RXQ_CMDID				= 0x832,
+	WMI_WRITE_MAC_TXQ_CMDID				= 0x833,
+	WMI_WRITE_MAC_XQ_FIELD_CMDID			= 0x834,
+	WMI_MLME_PUSH_CMDID				= 0x835,
+	WMI_BEAMFORMING_MGMT_CMDID			= 0x836,
+	WMI_BF_TXSS_MGMT_CMDID				= 0x837,
+	WMI_BF_SM_MGMT_CMDID				= 0x838,
+	WMI_BF_RXSS_MGMT_CMDID				= 0x839,
+	WMI_BF_TRIG_CMDID				= 0x83A,
+	WMI_LINK_MAINTAIN_CFG_WRITE_CMDID		= 0x842,
+	WMI_LINK_MAINTAIN_CFG_READ_CMDID		= 0x843,
+	WMI_SET_SECTORS_CMDID				= 0x849,
+	WMI_MAINTAIN_PAUSE_CMDID			= 0x850,
+	WMI_MAINTAIN_RESUME_CMDID			= 0x851,
+	WMI_RS_MGMT_CMDID				= 0x852,
+	WMI_RF_MGMT_CMDID				= 0x853,
+	WMI_THERMAL_THROTTLING_CTRL_CMDID		= 0x854,
+	WMI_THERMAL_THROTTLING_GET_STATUS_CMDID		= 0x855,
+	WMI_OTP_READ_CMDID				= 0x856,
+	WMI_OTP_WRITE_CMDID				= 0x857,
+	WMI_LED_CFG_CMDID				= 0x858,
 	/* Performance monitoring commands */
-	WMI_BF_CTRL_CMDID			= 0x862,
-	WMI_NOTIFY_REQ_CMDID			= 0x863,
-	WMI_GET_STATUS_CMDID			= 0x864,
-	WMI_GET_RF_STATUS_CMDID			= 0x866,
-	WMI_GET_BASEBAND_TYPE_CMDID		= 0x867,
-	WMI_UNIT_TEST_CMDID			= 0x900,
-	WMI_HICCUP_CMDID			= 0x901,
-	WMI_FLASH_READ_CMDID			= 0x902,
-	WMI_FLASH_WRITE_CMDID			= 0x903,
+	WMI_BF_CTRL_CMDID				= 0x862,
+	WMI_NOTIFY_REQ_CMDID				= 0x863,
+	WMI_GET_STATUS_CMDID				= 0x864,
+	WMI_GET_RF_STATUS_CMDID				= 0x866,
+	WMI_GET_BASEBAND_TYPE_CMDID			= 0x867,
+	WMI_UNIT_TEST_CMDID				= 0x900,
+	WMI_HICCUP_CMDID				= 0x901,
+	WMI_FLASH_READ_CMDID				= 0x902,
+	WMI_FLASH_WRITE_CMDID				= 0x903,
 	/* Power management */
-	WMI_TRAFFIC_DEFERRAL_CMDID		= 0x904,
-	WMI_TRAFFIC_RESUME_CMDID		= 0x905,
+	WMI_TRAFFIC_DEFERRAL_CMDID			= 0x904,
+	WMI_TRAFFIC_RESUME_CMDID			= 0x905,
 	/* P2P */
-	WMI_P2P_CFG_CMDID			= 0x910,
-	WMI_PORT_ALLOCATE_CMDID			= 0x911,
-	WMI_PORT_DELETE_CMDID			= 0x912,
-	WMI_POWER_MGMT_CFG_CMDID		= 0x913,
-	WMI_START_LISTEN_CMDID			= 0x914,
-	WMI_START_SEARCH_CMDID			= 0x915,
-	WMI_DISCOVERY_START_CMDID		= 0x916,
-	WMI_DISCOVERY_STOP_CMDID		= 0x917,
-	WMI_PCP_START_CMDID			= 0x918,
-	WMI_PCP_STOP_CMDID			= 0x919,
-	WMI_GET_PCP_FACTOR_CMDID		= 0x91B,
+	WMI_P2P_CFG_CMDID				= 0x910,
+	WMI_PORT_ALLOCATE_CMDID				= 0x911,
+	WMI_PORT_DELETE_CMDID				= 0x912,
+	WMI_POWER_MGMT_CFG_CMDID			= 0x913,
+	WMI_START_LISTEN_CMDID				= 0x914,
+	WMI_START_SEARCH_CMDID				= 0x915,
+	WMI_DISCOVERY_START_CMDID			= 0x916,
+	WMI_DISCOVERY_STOP_CMDID			= 0x917,
+	WMI_PCP_START_CMDID				= 0x918,
+	WMI_PCP_STOP_CMDID				= 0x919,
+	WMI_GET_PCP_FACTOR_CMDID			= 0x91B,
 	/* Power Save Configuration Commands */
-	WMI_PS_DEV_PROFILE_CFG_CMDID		= 0x91C,
+	WMI_PS_DEV_PROFILE_CFG_CMDID			= 0x91C,
 	/* Not supported yet */
-	WMI_PS_DEV_CFG_CMDID			= 0x91D,
+	WMI_PS_DEV_CFG_CMDID				= 0x91D,
 	/* Not supported yet */
-	WMI_PS_DEV_CFG_READ_CMDID		= 0x91E,
+	WMI_PS_DEV_CFG_READ_CMDID			= 0x91E,
 	/* Per MAC Power Save Configuration commands
 	 * Not supported yet
 	 */
-	WMI_PS_MID_CFG_CMDID			= 0x91F,
+	WMI_PS_MID_CFG_CMDID				= 0x91F,
 	/* Not supported yet */
-	WMI_PS_MID_CFG_READ_CMDID		= 0x920,
-	WMI_RS_CFG_CMDID			= 0x921,
-	WMI_GET_DETAILED_RS_RES_CMDID		= 0x922,
-	WMI_AOA_MEAS_CMDID			= 0x923,
-	WMI_SET_MGMT_RETRY_LIMIT_CMDID		= 0x930,
-	WMI_GET_MGMT_RETRY_LIMIT_CMDID		= 0x931,
-	WMI_TOF_SESSION_START_CMDID		= 0x991,
-	WMI_TOF_GET_CAPABILITIES_CMDID		= 0x992,
-	WMI_TOF_SET_LCR_CMDID			= 0x993,
-	WMI_TOF_SET_LCI_CMDID			= 0x994,
-	WMI_TOF_CHANNEL_INFO_CMDID		= 0x995,
-	WMI_GET_RF_SECTOR_PARAMS_CMDID		= 0x9A0,
-	WMI_SET_RF_SECTOR_PARAMS_CMDID		= 0x9A1,
-	WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID	= 0x9A2,
-	WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID	= 0x9A3,
-	WMI_SET_RF_SECTOR_ON_CMDID		= 0x9A4,
-	WMI_SET_MAC_ADDRESS_CMDID		= 0xF003,
-	WMI_ABORT_SCAN_CMDID			= 0xF007,
-	WMI_SET_PROMISCUOUS_MODE_CMDID		= 0xF041,
-	WMI_GET_PMK_CMDID			= 0xF048,
-	WMI_SET_PASSPHRASE_CMDID		= 0xF049,
-	WMI_SEND_ASSOC_RES_CMDID		= 0xF04A,
-	WMI_SET_ASSOC_REQ_RELAY_CMDID		= 0xF04B,
-	WMI_MAC_ADDR_REQ_CMDID			= 0xF04D,
-	WMI_FW_VER_CMDID			= 0xF04E,
-	WMI_PMC_CMDID				= 0xF04F,
+	WMI_PS_MID_CFG_READ_CMDID			= 0x920,
+	WMI_RS_CFG_CMDID				= 0x921,
+	WMI_GET_DETAILED_RS_RES_CMDID			= 0x922,
+	WMI_AOA_MEAS_CMDID				= 0x923,
+	WMI_SET_MGMT_RETRY_LIMIT_CMDID			= 0x930,
+	WMI_GET_MGMT_RETRY_LIMIT_CMDID			= 0x931,
+	WMI_TOF_SESSION_START_CMDID			= 0x991,
+	WMI_TOF_GET_CAPABILITIES_CMDID			= 0x992,
+	WMI_TOF_SET_LCR_CMDID				= 0x993,
+	WMI_TOF_SET_LCI_CMDID				= 0x994,
+	WMI_TOF_CHANNEL_INFO_CMDID			= 0x995,
+	WMI_TOF_SET_TX_RX_OFFSET_CMDID			= 0x997,
+	WMI_TOF_GET_TX_RX_OFFSET_CMDID			= 0x998,
+	WMI_GET_RF_SECTOR_PARAMS_CMDID			= 0x9A0,
+	WMI_SET_RF_SECTOR_PARAMS_CMDID			= 0x9A1,
+	WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID		= 0x9A2,
+	WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID		= 0x9A3,
+	WMI_SET_RF_SECTOR_ON_CMDID			= 0x9A4,
+	WMI_PRIO_TX_SECTORS_ORDER_CMDID			= 0x9A5,
+	WMI_PRIO_TX_SECTORS_NUMBER_CMDID		= 0x9A6,
+	WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID	= 0x9A7,
+	WMI_SET_MAC_ADDRESS_CMDID			= 0xF003,
+	WMI_ABORT_SCAN_CMDID				= 0xF007,
+	WMI_SET_PROMISCUOUS_MODE_CMDID			= 0xF041,
+	WMI_GET_PMK_CMDID				= 0xF048,
+	WMI_SET_PASSPHRASE_CMDID			= 0xF049,
+	WMI_SEND_ASSOC_RES_CMDID			= 0xF04A,
+	WMI_SET_ASSOC_REQ_RELAY_CMDID			= 0xF04B,
+	WMI_MAC_ADDR_REQ_CMDID				= 0xF04D,
+	WMI_FW_VER_CMDID				= 0xF04E,
+	WMI_PMC_CMDID					= 0xF04F,
 };
 
 /* WMI_CONNECT_CMDID */
@@ -959,6 +965,15 @@ struct wmi_tof_channel_info_cmd {
 	__le32 channel_info_report_request;
 } __packed;
 
+/* WMI_TOF_SET_TX_RX_OFFSET_CMDID */
+struct wmi_tof_set_tx_rx_offset_cmd {
+	/* TX delay offset */
+	__le32 tx_offset;
+	/* RX delay offset */
+	__le32 rx_offset;
+	__le32 reserved[2];
+} __packed;
+
 /* WMI Events
  * List of Events (target to host)
  */
@@ -1060,11 +1075,16 @@ enum wmi_event_id {
 	WMI_TOF_SET_LCI_EVENTID				= 0x1994,
 	WMI_TOF_FTM_PER_DEST_RES_EVENTID		= 0x1995,
 	WMI_TOF_CHANNEL_INFO_EVENTID			= 0x1996,
+	WMI_TOF_SET_TX_RX_OFFSET_EVENTID		= 0x1997,
+	WMI_TOF_GET_TX_RX_OFFSET_EVENTID		= 0x1998,
 	WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID		= 0x19A0,
 	WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID		= 0x19A1,
 	WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID	= 0x19A2,
 	WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID	= 0x19A3,
 	WMI_SET_RF_SECTOR_ON_DONE_EVENTID		= 0x19A4,
+	WMI_PRIO_TX_SECTORS_ORDER_EVENTID		= 0x19A5,
+	WMI_PRIO_TX_SECTORS_NUMBER_EVENTID		= 0x19A6,
+	WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID	= 0x19A7,
 	WMI_SET_CHANNEL_EVENTID				= 0x9000,
 	WMI_ASSOC_REQ_EVENTID				= 0x9001,
 	WMI_EAPOL_RX_EVENTID				= 0x9002,
@@ -1190,6 +1210,7 @@ enum baseband_type {
 	BASEBAND_SPARROW_M_B0	= 0x05,
 	BASEBAND_SPARROW_M_C0	= 0x06,
 	BASEBAND_SPARROW_M_D0	= 0x07,
+	BASEBAND_TALYN_M_A0	= 0x08,
 };
 
 /* WMI_GET_BASEBAND_TYPE_EVENTID */
@@ -2224,6 +2245,25 @@ struct wmi_tof_channel_info_event {
 	u8 report[0];
 } __packed;
 
+/* WMI_TOF_SET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_set_tx_rx_offset_event {
+	/* enum wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_TOF_GET_TX_RX_OFFSET_EVENTID */
+struct wmi_tof_get_tx_rx_offset_event {
+	/* enum wmi_fw_status */
+	u8 status;
+	u8 reserved1[3];
+	/* TX delay offset */
+	__le32 tx_offset;
+	/* RX delay offset */
+	__le32 rx_offset;
+	__le32 reserved2[2];
+} __packed;
+
 /* Result status codes for WMI commands */
 enum wmi_rf_sector_status {
 	WMI_RF_SECTOR_STATUS_SUCCESS			= 0x00,
@@ -2388,4 +2428,100 @@ struct wmi_set_rf_sector_on_done_event {
 	u8 reserved[3];
 } __packed;
 
+enum wmi_sector_sweep_type {
+	WMI_SECTOR_SWEEP_TYPE_TXSS		= 0x00,
+	WMI_SECTOR_SWEEP_TYPE_BCON		= 0x01,
+	WMI_SECTOR_SWEEP_TYPE_TXSS_AND_BCON	= 0x02,
+	WMI_SECTOR_SWEEP_TYPE_NUM		= 0x03,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_CMDID
+ *
+ * Set the order of TX sectors in TXSS and/or Beacon(AP).
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_ORDER_EVENTID
+ */
+struct wmi_prio_tx_sectors_order_cmd {
+	/* tx sectors order to be applied, 0xFF for end of array */
+	u8 tx_sectors_priority_array[MAX_NUM_OF_SECTORS];
+	/* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+	u8 sector_sweep_type;
+	/* needed only for TXSS configuration */
+	u8 cid;
+	/* alignment to 32b */
+	u8 reserved[2];
+} __packed;
+
+/* completion status codes */
+enum wmi_prio_tx_sectors_cmd_status {
+	WMI_PRIO_TX_SECT_CMD_STATUS_SUCCESS	= 0x00,
+	WMI_PRIO_TX_SECT_CMD_STATUS_BAD_PARAM	= 0x01,
+	/* other error */
+	WMI_PRIO_TX_SECT_CMD_STATUS_ERROR	= 0x02,
+};
+
+/* WMI_PRIO_TX_SECTORS_ORDER_EVENTID */
+struct wmi_prio_tx_sectors_order_event {
+	/* enum wmi_prio_tx_sectors_cmd_status */
+	u8 status;
+	/* alignment to 32b */
+	u8 reserved[3];
+} __packed;
+
+struct wmi_prio_tx_sectors_num_cmd {
+	/* [0-128], 0 = No changes */
+	u8 beacon_number_of_sectors;
+	/* [0-128], 0 = No changes */
+	u8 txss_number_of_sectors;
+	/* [0-8] needed only for TXSS configuration */
+	u8 cid;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_CMDID
+ *
+ * Set the number of active sectors in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_NUMBER_EVENTID
+ */
+struct wmi_prio_tx_sectors_number_cmd {
+	struct wmi_prio_tx_sectors_num_cmd active_sectors_num;
+	/* alignment to 32b */
+	u8 reserved;
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_NUMBER_EVENTID */
+struct wmi_prio_tx_sectors_number_event {
+	/* enum wmi_prio_tx_sectors_cmd_status */
+	u8 status;
+	/* alignment to 32b */
+	u8 reserved[3];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID
+ *
+ * Set default sectors order and number (hard coded in board file)
+ * in TXSS and/or Beacon.
+ *
+ * Returned event:
+ * - WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID
+ */
+struct wmi_prio_tx_sectors_set_default_cfg_cmd {
+	/* enum wmi_sector_sweep_type, TXSS and/or Beacon */
+	u8 sector_sweep_type;
+	/* needed only for TXSS configuration */
+	u8 cid;
+	/* alignment to 32b */
+	u8 reserved[2];
+} __packed;
+
+/* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID */
+struct wmi_prio_tx_sectors_set_default_cfg_event {
+	/* enum wmi_prio_tx_sectors_cmd_status */
+	u8 status;
+	/* alignment to 32b */
+	u8 reserved[3];
+} __packed;
+
 #endif /* __WILOCITY_WMI_H__ */
-- 
1.9.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux