From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
In order to obtain retry count for a given rate we need to pass the
full struct ieee80211_tx_info to the function setting the rate in he
TX descriptor.
This uncovered a huge bug where the old code would use struct
ieee80211_rate.flags to test for rate parameters, which is always
zero, instead of the flags value from struct ieee80211_tx_rate.
Time to find a brown paper bag :(
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 27 ++++----
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 71 ++++++++++++++--------
2 files changed, 60 insertions(+), 38 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index bc3c990..df551b2 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -1337,10 +1337,11 @@ struct rtl8xxxu_fileops {
u32 ramask, int sgi);
void (*report_connect) (struct rtl8xxxu_priv *priv,
u8 macid, bool connect);
- void (*fill_txdesc) (struct ieee80211_hdr *hdr,
- struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
- u16 rate_flag, bool sgi, bool short_preamble,
- bool ampdu_enable, u32 rts_rate);
+ void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *tx_info,
+ struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+ bool short_preamble, bool ampdu_enable,
+ u32 rts_rate);
int writeN_block_size;
int rx_agg_buf_size;
char tx_desc_size;
@@ -1434,14 +1435,16 @@ int rtl8xxxu_parse_rxdesc24(struct rtl8xxxu_priv *priv, struct sk_buff *skb);
int rtl8xxxu_gen2_channel_to_group(int channel);
bool rtl8xxxu_gen2_simularity_compare(struct rtl8xxxu_priv *priv,
int result[][8], int c1, int c2);
-void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
- struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
- u16 rate_flag, bool sgi, bool short_preamble,
- bool ampdu_enable, u32 rts_rate);
-void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
- struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
- u16 rate_flag, bool sgi, bool short_preamble,
- bool ampdu_enable, u32 rts_rate);
+void rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *tx_info,
+ struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+ bool short_preamble, bool ampdu_enable,
+ u32 rts_rate);
+void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *tx_info,
+ struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+ bool short_preamble, bool ampdu_enable,
+ u32 rts_rate);
extern struct rtl8xxxu_fileops rtl8192cu_fops;
extern struct rtl8xxxu_fileops rtl8192eu_fops;
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index a4ac557..04141e5 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4759,13 +4759,28 @@ static void rtl8xxxu_dump_action(struct device *dev,
* This format is used on 8188cu/8192cu/8723au
*/
void
-rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
- struct rtl8xxxu_txdesc32 *tx_desc, u32 rate,
- u16 rate_flag, bool sgi, bool short_preamble,
- bool ampdu_enable, u32 rts_rate)
+rtl8xxxu_fill_txdesc_v1(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *tx_info,
+ struct rtl8xxxu_txdesc32 *tx_desc, bool sgi,
+ bool short_preamble, bool ampdu_enable, u32 rts_rate)
{
+ struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
+ struct rtl8xxxu_priv *priv = hw->priv;
+ struct device *dev = &priv->udev->dev;
+ u32 rate;
+ u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
+ if (rate_flags & IEEE80211_TX_RC_MCS &&
+ !ieee80211_is_mgmt(hdr->frame_control))
+ rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
+ else
+ rate = tx_rate->hw_value;
+
+ if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+ dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
+ __func__, rate, cpu_to_le16(tx_desc->pkt_size));
+
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
tx_desc->txdw5 = cpu_to_le32(rate);
@@ -4800,10 +4815,10 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
tx_desc->txdw4 |= cpu_to_le32(rts_rate << TXDESC32_RTS_RATE_SHIFT);
- if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+ if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
- } else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_CTS_SELF_ENABLE);
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
}
@@ -4814,16 +4829,31 @@ rtl8xxxu_fill_txdesc_v1(struct ieee80211_hdr *hdr,
* This format is used on 8192eu/8723bu
*/
void
-rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
- struct rtl8xxxu_txdesc32 *tx_desc32, u32 rate,
- u16 rate_flag, bool sgi, bool short_preamble,
- bool ampdu_enable, u32 rts_rate)
+rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr,
+ struct ieee80211_tx_info *tx_info,
+ struct rtl8xxxu_txdesc32 *tx_desc32, bool sgi,
+ bool short_preamble, bool ampdu_enable, u32 rts_rate)
{
+ struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
+ struct rtl8xxxu_priv *priv = hw->priv;
+ struct device *dev = &priv->udev->dev;
struct rtl8xxxu_txdesc40 *tx_desc40;
+ u32 rate;
+ u16 rate_flags = tx_info->control.rates[0].flags;
u16 seq_number;
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc32;
+ if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
+ dev_info(dev, "%s: TX rate: %d, pkt size %d\n",
+ __func__, rate, cpu_to_le16(tx_desc40->pkt_size));
+
+ if (rate_flags & IEEE80211_TX_RC_MCS &&
+ !ieee80211_is_mgmt(hdr->frame_control))
+ rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
+ else
+ rate = tx_rate->hw_value;
+
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
tx_desc40->txdw4 = cpu_to_le32(rate);
@@ -4854,10 +4884,10 @@ rtl8xxxu_fill_txdesc_v2(struct ieee80211_hdr *hdr,
/*
* rts_rate is zero if RTS/CTS or CTS to SELF are not enabled
*/
- if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+ if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
tx_desc40->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
- } else if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ } else if (rate_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
/*
* For some reason the vendor driver doesn't set
* TXDESC40_HW_RTS_ENABLE for CTS to SELF
@@ -4872,14 +4902,13 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
- struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
struct rtl8xxxu_priv *priv = hw->priv;
struct rtl8xxxu_txdesc32 *tx_desc;
struct rtl8xxxu_tx_urb *tx_urb;
struct ieee80211_sta *sta = NULL;
struct ieee80211_vif *vif = tx_info->control.vif;
struct device *dev = &priv->udev->dev;
- u32 queue, rate, rts_rate;
+ u32 queue, rts_rate;
u16 pktlen = skb->len;
u16 seq_number;
u16 rate_flag = tx_info->control.rates[0].flags;
@@ -4906,10 +4935,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
goto error;
}
- if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
- dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n",
- __func__, tx_rate->bitrate, tx_rate->hw_value, pktlen);
-
if (ieee80211_is_action(hdr->frame_control))
rtl8xxxu_dump_action(dev, hdr);
@@ -4963,12 +4988,6 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
}
}
- if (rate_flag & IEEE80211_TX_RC_MCS &&
- !ieee80211_is_mgmt(hdr->frame_control))
- rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
- else
- rate = tx_rate->hw_value;
-
if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
(ieee80211_is_data_qos(hdr->frame_control) &&
sta && sta->ht_cap.cap &
@@ -4988,8 +5007,8 @@ static void rtl8xxxu_tx(struct ieee80211_hw *hw,
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
- priv->fops->fill_txdesc(hdr, tx_desc, rate, rate_flag, sgi,
- short_preamble, ampdu_enable, rts_rate);
+ priv->fops->fill_txdesc(hw, hdr, tx_info, tx_desc, sgi, short_preamble,
+ ampdu_enable, rts_rate);
rtl8xxxu_calc_tx_desc_csum(tx_desc);
--
2.7.4
