From: Xinming Hu <huxm@xxxxxxxxxxx>
card->adapter gets initialized in mwifiex_register_dev(). As it's not
cleared in mwifiex_unregister_dev(), we may end up accessing the memory
which is already free in below scenario.
Scenario: Driver initialization is failed due to incorrect firmware or
some other reason. Meanwhile device reboot/unload occurs.
This is safe, now that we've properly synchronized suspend() and
remove() with the FW initialization thread; now that code can simply
check for 'card->adapter == NULL' and exit safely.
Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
Tested-by: Xinming Hu <huxm@xxxxxxxxxxx>
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
v3: Same as v1 and v2
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 1 +
drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index 4d96683..1ab366c 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -3048,6 +3048,7 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
if (card->msi_enable)
pci_disable_msi(pdev);
}
+ card->adapter = NULL;
}
}
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index 39ffe7d..4c4b012 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -2019,6 +2019,7 @@ static int mwifiex_alloc_sdio_mpa_buffers(struct mwifiex_adapter *adapter,
struct sdio_mmc_card *card = adapter->card;
if (adapter->card) {
+ card->adapter = NULL;
sdio_claim_host(card->func);
sdio_disable_func(card->func);
sdio_release_host(card->func);
--
1.9.1
