On Wed, Nov 09, 2016 at 12:35:22PM +0000, Amitkumar Karwar wrote: > Hi Brian, Hi, > > From: Brian Norris [mailto:briannorris@xxxxxxxxxxxx] > > Sent: Thursday, November 03, 2016 2:16 AM > > To: Kalle Valo > > Cc: Dmitry Torokhov; Amitkumar Karwar; linux-wireless@xxxxxxxxxxxxxxx; > > Cathy Luo; Nishant Sarmukadam; Xinming Hu > > Subject: Re: [PATCH 5/5] mwifiex: wait for firmware dump completion in > > remove_card > > > > On Thu, Oct 27, 2016 at 04:20:25PM +0300, Kalle Valo wrote: > > > Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> writes: > > > > > > >> +/* reset_trigger variable is used to identify if > > > >> +mwifiex_sdio_remove() > > > >> + * is called by sdio_work during reset or the call is from sdio > > subsystem. > > > >> + * We will cancel sdio_work only if the call is from sdio > > subsystem. > > > >> + */ > > > >> +static u8 reset_triggered; > > > > > > > > It would be really great if the driver supported multiple devices. > > > > IOW please avoid module-globals. > > > > > > Good catch, it's a hard requirement to support multiple devices at the > > > same time. > > > > BTW, this problem is repeated in several places throughout this driver. > > For instance, look for 'user_rmmod' (why? you shouldn't need to treat > > module unload differently...) > > We have 2 kinds of teardown cases. > 1) Chip is going to be powered off. > a) System reboot > b) Someone manually removed wifi card from system > 2) User unloaded the driver. > > In case 1. b), we can't have logic to terminate WIFI connection and > download SHUTDOWN command to firmware, as hardware itself is not > present. That seems like a poor way of determining the difference between hot unplug and clean shutdown. What if unplug happens concurrently with rmmod? Seems like it'd be better to identify hardware failures as such, and just skip talking to HW. Also, for interfaces that support unplug well (like USB), shouldn't you be able to get hotplug info from the driver core, instead of having to guess the inverse of that ("this was not a hotplug") from static variables like that? > This logic is useful when user just unloads and loads the driver. > Firmware download will be skipped in this case, as it's already > running. SHUTDOWN command sent during unload has cleared firmware's > state. Why is that useful? > 'user_rmmod' flag doesn't create problem for supporting multiple > devices. The flag is true during module unload OR reboot. It's > applicable for all devices. > > > and the work structs (and corresponding > > 'saved_adapter' and 'iface_flags') used for PCIe function-level reset > > and SDIO reset. > > We are working on the v3 of this patch series. We will try to get rid > of these variables along with global "work_struct" as you suggested. Good, thanks. Brian
