From: Tamizh chelvam <tamizhchelvam@xxxxxxxxxxxxxx> There two things done in this patch. 1) 'btcoex_support' flag for BTCOEX feature support by the hardware. 2) 'wlan_btcoex_gpio' is used to fill wlan priority pin number for BTCOEX priority feature support. Signed-off-by: Tamizh chelvam <tamizhchelvam@xxxxxxxxxxxxxx> --- .../bindings/net/wireless/qcom,ath10k.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 74d7f0a..08150e2d 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -46,6 +46,10 @@ Optional properties: hw versions. - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. +- btcoex_support : should contain eithr "0" or "1" to indicate btcoex + support by the hardware. +- btcoex_gpio_pin : btcoex gpio pin number for the device which + supports BTCOEX. Example (to supply the calibration data alone): -- 1.7.9.5
