[PATCH 09/10] rt2800: tune *_PROT_CFG parameters

[Stanislaw Gruszka <sgruszka@xxxxxxxxxx>]

Use RTS/CTS protection for TXOP on all rates modes as default and
disable CCK rates (this cause performance problems).

Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 57bfec4..8d35b2e 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4771,9 +4771,9 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
 	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 1);
 	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV_SHORT, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
 	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
 	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
 	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
@@ -4784,9 +4784,9 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
 	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 1);
 	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV_SHORT, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
 	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
 	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
 	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
@@ -4797,9 +4797,9 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
 	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 1);
 	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV_SHORT, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 0);
 	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
 	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
 	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
@@ -4810,9 +4810,9 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 1);
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV_SHORT, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 0);
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
 	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-- 
1.7.1