We should only set IEEE80211_HT_MCS_TX_RX_DIF when TX and RX MCS sets
are not equal, i.e. when number of tx streams is different than
number of RX streams.
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 23 +++++++++++++----------
1 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index bf3f0a3..aab59f6 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -7464,7 +7464,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
char *default_power1;
char *default_power2;
char *default_power3;
- unsigned int i;
+ unsigned int i, tx_chains, rx_chains;
u32 reg;
/*
@@ -7589,21 +7589,24 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
IEEE80211_HT_CAP_SGI_20 |
IEEE80211_HT_CAP_SGI_40;
- if (rt2x00dev->default_ant.tx_chain_num >= 2)
+ tx_chains = rt2x00dev->default_ant.tx_chain_num;
+ rx_chains = rt2x00dev->default_ant.rx_chain_num;
+
+ if (tx_chains >= 2)
spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
- spec->ht.cap |= rt2x00dev->default_ant.rx_chain_num <<
- IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ spec->ht.cap |= rx_chains << IEEE80211_HT_CAP_RX_STBC_SHIFT;
spec->ht.ampdu_factor = 3;
spec->ht.ampdu_density = 4;
- spec->ht.mcs.tx_params =
- IEEE80211_HT_MCS_TX_DEFINED |
- IEEE80211_HT_MCS_TX_RX_DIFF |
- ((rt2x00dev->default_ant.tx_chain_num - 1) <<
- IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+ spec->ht.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+ if (tx_chains != rx_chains) {
+ spec->ht.mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
+ spec->ht.mcs.tx_params |=
+ (tx_chains - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+ }
- switch (rt2x00dev->default_ant.rx_chain_num) {
+ switch (rx_chains) {
case 3:
spec->ht.mcs.rx_mask[2] = 0xff;
case 2:
--
1.7.1
