ath10k cannot show tx rates right now in a easy way. since tx rate
handling is done by the cards own firmware and not by the mac80211
wireless stack
Sebastian
Am 30.10.2016 um 21:50 schrieb James Cloos:
I recently received my turris omnia and put it into operation yesterday.
(It is only doing wireless; I have a different box for my main router.)
All of the machines on the wlan show backwards transfer speeds; they
upload reasonable fast but downloads are in the kbit/s range.
That applies to the both the 11ac-capable machines and the 11n-on-2.4
machines.
Luci's status/overview page shows 'Bitrate: 6 Mbit/s' for the ath10k and
'Bitrate: 61.5 Mbit/s' for the ath9k.
(The two wireless cards in it are:
01:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)
02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac Wireless Network Adapter
)
Googling has not helped me figure out how to get propper bandwidth.
All of the search results were about wan links, not about wlan links.
What should I look at to diagnose this?
-JimC
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Berliner Ring 101, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@xxxxxxxxxx
Tel.: +496251-582650 / Fax: +496251-5826565
