We have observed a kernel crash when system immediately suspends
after booting. There is a race between suspend and driver initialization
paths. This patch adds hw_status checks in suspend/resume to fix this issue
and other corner cases.
Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
---
v2: Return failure in suspend/resume handler in this scenario.
v3: Handle "hw_status" not READY cases carefully. Return 0 if
init or shutdown is in progress. Return -EBUSY if firmware download
failed or command timeout ocurred(non-recoverable). (Brian Norris)
v4: In resume, we need not return failure.
v5: Same as v4
---
drivers/net/wireless/marvell/mwifiex/pcie.c | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
index dd4006e..94f75be 100644
--- a/drivers/net/wireless/marvell/mwifiex/pcie.c
+++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
@@ -104,13 +104,22 @@ static int mwifiex_pcie_suspend(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
+ if (!card || !card->adapter ||
+ card->adapter->hw_status == MWIFIEX_HW_STATUS_RESET ||
+ card->adapter->hw_status == MWIFIEX_HW_STATUS_NOT_READY) {
+ pr_err("Card or adapter structure is not valid or hw_status shows failure\n");
return 0;
}
adapter = card->adapter;
+ if (adapter->hw_status == MWIFIEX_HW_STATUS_INITIALIZING ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_INIT_DONE ||
+ adapter->hw_status == MWIFIEX_HW_STATUS_CLOSING) {
+ pr_err("We are in the middle of initialzaion or closing\n");
+ return -EBUSY;
+ }
+
/* Enable the Host Sleep */
if (!mwifiex_enable_hs(adapter)) {
mwifiex_dbg(adapter, ERROR,
@@ -143,8 +152,10 @@ static int mwifiex_pcie_resume(struct device *dev)
struct pci_dev *pdev = to_pci_dev(dev);
card = pci_get_drvdata(pdev);
- if (!card || !card->adapter) {
- pr_err("Card or adapter structure is not valid\n");
+
+ if (!card || !card->adapter ||
+ card->adapter->hw_status != MWIFIEX_HW_STATUS_READY) {
+ pr_err("Card or adapter structure is not valid or hw_status is not ready\n");
return 0;
}
--
1.9.1
