Search Linux Wireless

Re: [PATCH v2 0/7] ath9k: EEPROM swapping improvements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> writes:

> There are two types of swapping the EEPROM data in the ath9k driver.
> Before this series one type of swapping could not be used without the
> other.
>
> The first type of swapping looks at the "magic bytes" at the start of
> the EEPROM data and performs swab16 on the EEPROM contents if needed.
> The second type of swapping is EEPROM format specific and swaps
> specific fields within the EEPROM itself (swab16, swab32 - depends on
> the EEPROM format).
>
> With this series the second part now looks at the EEPMISC register
> inside the EEPROM, which uses a bit to indicate if the EEPROM data
> is Big Endian (this is also done by the FreeBSD kernel).
> This has a nice advantage: currently there are some out-of-tree hacks
> (in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a
> Big Endian system (= no swab16 is performed) but the EEPROM itself
> indicates that it's data is Little Endian. Until now the out-of-tree
> code simply did a swab16 before passing the data to ath9k, so ath9k
> first did the swab16 - this also enabled the format specific swapping.
> These out-of-tree hacks are still working with the new logic, but it
> is recommended to remove them. This implementation is based on a
> discussion with Arnd Bergmann who raised concerns about the
> robustness and portability of the swapping logic in the original OF
> support patch review, see [0].
>
> After a second round of patches (= v1 of this series) neither Arnd
> Bergmann nor I were really happy with the complexity of the EEPROM
> swapping logic. Based on a discussion (see [1] and [2]) we decided
> that ath9k should use a defined format (specifying the endianness
> of the data - I went with __le16 and __le32) when accessing the
> EEPROM fields. A benefit of this is that we enable the EEPMISC based
> swapping logic by default, just like the FreeBSD driver, see [3]. On
> the devices which I have tested (see below) ath9k now works without
> having to specify the "endian_check" field in ath9k_platform_data (or
> a similar logic which could provide this via devicetree) as ath9k now
> detects the endianness automatically. Only EEPROMs which are mangled
> by some out-of-tree code still need the endian_check flag (or one can
> simply remove that mangling from the out-of-tree code).
>
> Testing:
> - tested by myself on AR9287 with Big Endian EEPROM
> - tested by myself on AR9227 with Little Endian EEPROM
> - tested by myself on AR9381 (using the ar9003_eeprom implementation,
>   which did not suffer from this whole problem)
> - how do we proceed with testing? maybe we could keep this in a
>   feature-branch and add these patches to LEDE once we have an ACK to
>   get more people to test this
>
> This series depends on my other series (v7):
> "add devicetree support to ath9k" - see [4]

I think this looks pretty good. If there's a bug somewhere it should be
quite easy to fix so I'm not that worried and would be willing to take
these as soon as I have applied the dependency series. IIRC your
devicetree patches will have at least one more review round so that will
take some time still. In the meantime it would be great if LEDE folks
could take a look at these and comment (or test).

-- 
Kalle Valo



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux