Search Linux Wireless

Re: [PATCH v4 1/3] mwifiex: reset card->adapter during device unregister

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+ Dmitry

Hi Amit,

On Mon, Oct 10, 2016 at 01:53:32PM -0700, Brian Norris wrote:
> On Thu, Oct 06, 2016 at 11:36:24PM +0530, Amitkumar Karwar wrote:
> > From: Xinming Hu <huxm@xxxxxxxxxxx>
> > 
> > card->adapter gets initialized during device registration.
> > As it's not cleared, we may end up accessing invalid memory
> > in some corner cases. This patch fixes the problem.
> > 
> > Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
> > Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
> > ---
> > v4: Same as v1, v2, v3
> > ---
> >  drivers/net/wireless/marvell/mwifiex/pcie.c | 1 +
> >  drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
> >  2 files changed, 2 insertions(+)
> > 
> > diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c
> > index f1eeb73..ba9e068 100644
> > --- a/drivers/net/wireless/marvell/mwifiex/pcie.c
> > +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c
> > @@ -3042,6 +3042,7 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
> >  				pci_disable_msi(pdev);
> >  	       }
> >  	}
> > +	card->adapter = NULL;
> >  }
> >  
> >  /* This function initializes the PCI-E host memory space, WCB rings, etc.
> > diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
> > index 8718950..4cad1c2 100644
> > --- a/drivers/net/wireless/marvell/mwifiex/sdio.c
> > +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
> > @@ -2066,6 +2066,7 @@ mwifiex_unregister_dev(struct mwifiex_adapter *adapter)
> >  	struct sdio_mmc_card *card = adapter->card;
> >  
> >  	if (adapter->card) {
> > +		card->adapter = NULL;
> >  		sdio_claim_host(card->func);
> >  		sdio_disable_func(card->func);
> >  		sdio_release_host(card->func);
> 
> As discussed on v1, I had qualms about the raciness between reads/writes
> of card->adapter, but I believe we:
> (a) can't have any command activity while writing the ->adapter field
> (either we're just init'ing the device, or we've disabled interrupts and
> are tearing it down) and
> (b) can't have a race between suspend()/resume() and unregister_dev(),
> since unregister_dev() is called from device remove() (which should not
> be concurrent with suspend()).
> 
> Also, I thought you had the same problem in usb.c, but in fact, you
> fixed that ages ago here:
> 
> 353d2a69ea26 mwifiex: fix issues in driver unload path for USB chipsets
> 
> Would be nice if fixes were bettery synchronized across the three
> interface drivers you support. We seem to be discovering unnecessary
> divergence on a few points recently.
> 
> At any rate:
> 
> Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> Tested-by: Brian Norris <briannorris@xxxxxxxxxxxx>

Dmitry helped me re-realize my original qualms:

mwifiex_unregister_dev() is called in the failure path for your async FW
request, and so it may race with suspend(). So I retract my Reviewed-by.
Sorry.

I'm going to look into converting to asynchronous device probing, which
might remove the need for async FW request, and would therefore resolve
both patch 1 and 3's races without any additional complicated hacks. But
I'm not sure if that will satisfy all mwifiex users well enough. I'll
have to give it a little more thought. Any thoughts from your side,
Amit?

Brian



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux