Search Linux Wireless

Re: [2/4] ath10k: implement offset_tsf ieee80211_op

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"Pedersen, Thomas" <twp@xxxxxxxxxxxxxxxx> wrote:
> Current set_tsf is implemented in terms of TSF_INCREMENT
> only. Instead support new WMI command TSF_DECREMENT and
> export these through offset_tsf. Advantage is we get
> more accurate TSF adjustments, and don't calculate wrong
> offset in case absolute TSF was calculated from rx_mactime
> (actual TSF).
> 
> The new WMI command is available in firmware
> 10.4-3.2.1-00033 for QCA4019 chips. Old drivers on new
> firmware or vice versa shouldn't  be a problem since
> get/set tsf logic was already broken.
> 
> Signed-off-by: Thomas Pedersen <twp@xxxxxxxxxxxxxxxx>

Depends on:

3a53731df7e2 mac80211: mesh: decrease max drift
354d381baf11 mac80211: add offset_tsf driver op and use it for mesh

2 patches set to Awaiting Upstream.

9355377 [2/4] ath10k: implement offset_tsf ieee80211_op
9355375 [3/4] ath10k: remove set/get_tsf ieee80211_ops

-- 
https://patchwork.kernel.org/patch/9355377/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux