Search Linux Wireless

RE: [PATCH] mwifiex: parse device tree node for PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

> From: Rob Herring [mailto:robh@xxxxxxxxxx]
> Sent: Tuesday, September 20, 2016 2:58 AM
> To: Amitkumar Karwar
> Cc: linux-wireless@xxxxxxxxxxxxxxx; Cathy Luo; Nishant Sarmukadam;
> devicetree@xxxxxxxxxxxxxxx; Wei-Ning Huang; Xinming Hu
> Subject: Re: [PATCH] mwifiex: parse device tree node for PCIe
> 
> On Fri, Sep 09, 2016 at 08:47:34PM +0530, Amitkumar Karwar wrote:
> > From: Xinming Hu <huxm@xxxxxxxxxxx>
> >
> > This patch derives device tree node from pcie bus layer framework.
> > Device tree bindings file has been renamed(marvell-sd8xxx.txt ->
> > marvell-8xxx.txt) to accomodate PCIe changes.
> >
> > Signed-off-by: Xinming Hu <huxm@xxxxxxxxxxx>
> > Signed-off-by: Amitkumar Karwar <akarwar@xxxxxxxxxxx>
> > ---
> >  .../bindings/net/wireless/marvell-8xxx.txt         | 64
> ++++++++++++++++++++++
> >  .../bindings/net/wireless/marvell-sd8xxx.txt       | 63 -------------
> --------
> 
> Resend using -M option so I do have to figure out if you added 1 line or
> changed a bunch.
> 
> >  drivers/net/wireless/marvell/mwifiex/pcie.c        | 19 +++++++
> >  drivers/net/wireless/marvell/mwifiex/sta_cmd.c     |  3 +-
> >  4 files changed, 85 insertions(+), 64 deletions(-)  create mode
> > 100644 Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> >  delete mode 100644
> > Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> > b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> > new file mode 100644
> > index 0000000..a8a95aa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
> > @@ -0,0 +1,64 @@
> > +Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices
> > +------
> > +
> > +This node provides properties for controlling the marvell sdio/pcie
> wireless device.
> > +The node is expected to be specified as a child node to the SDIO/PCIE
> > +controller that connects the device to the system.
> > +
> > +Required properties:
> > +
> > +  - compatible : should be one of the following:
> > +	* "marvell,sd8897"
> > +	* "marvell,sd8997"
> > +	* "marvell,pcie8997"
> 
> PCIe uses vendor and product IDs for compatible strings. Please read the
> OF PCI bus bindings doc.
> 

Thanks for review. I have submitted updated version(V3) with this change.

Regards,
Amitkumar Karwar



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux