From: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
As soon as debugging is turned on, the logs are filled with messages
reporting the interrupt status. As this quantity is usually zero, this
output is not needed. In fact, there will be a report if the status is
not zero, thus the debug line in question could probably be deleted.
Rather than taking that action, I have changed it to only be printed
when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug
mask.
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 +
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
index a10a57c..10166289 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h
@@ -29,6 +29,7 @@
#define RTL8XXXU_DEBUG_H2C 0x800
#define RTL8XXXU_DEBUG_ACTION 0x1000
#define RTL8XXXU_DEBUG_EFUSE 0x2000
+#define RTL8XXXU_DEBUG_INTERRUPT 0x4000
#define RTW_USB_CONTROL_MSG_TIMEOUT 500
#define RTL8XXXU_MAX_REG_POLL 500
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 71145eb..b2d7f6e 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5375,7 +5375,8 @@ static void rtl8xxxu_int_complete(struct urb *urb)
struct device *dev = &priv->udev->dev;
int ret;
- dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
+ if (rtl8xxxu_debug & RTL8XXXU_DEBUG_INTERRUPT)
+ dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
if (urb->status == 0) {
usb_anchor_urb(urb, &priv->int_anchor);
ret = usb_submit_urb(urb, GFP_ATOMIC);
--
2.7.4
