From: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
This powers down the 8192e correctly, or at least to the point where
the firmware will load again, when reloading the driver module.
Signed-off-by: Jes Sorensen <Jes.Sorensen@xxxxxxxxxx>
---
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 144 ++++++++++++++++++++-
.../net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 1 +
2 files changed, 144 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
index 841522e..df54d27 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c
@@ -1396,6 +1396,114 @@ exit:
return ret;
}
+static int rtl8192eu_active_to_lps(struct rtl8xxxu_priv *priv)
+{
+ struct device *dev = &priv->udev->dev;
+ u8 val8;
+ u16 val16;
+ u32 val32;
+ int retry, retval;
+
+ rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
+
+ retry = 100;
+ retval = -EBUSY;
+ /*
+ * Poll 32 bit wide 0x05f8 for 0x00000000 to ensure no TX is pending.
+ */
+ do {
+ val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD);
+ if (!val32) {
+ retval = 0;
+ break;
+ }
+ } while (retry--);
+
+ if (!retry) {
+ dev_warn(dev, "Failed to flush TX queue\n");
+ retval = -EBUSY;
+ goto out;
+ }
+
+ /* Disable CCK and OFDM, clock gated */
+ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+ val8 &= ~SYS_FUNC_BBRSTB;
+ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+ udelay(2);
+
+ /* Reset whole BB */
+ val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
+ val8 &= ~SYS_FUNC_BB_GLB_RSTN;
+ rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
+
+ /* Reset MAC TRX */
+ val16 = rtl8xxxu_read16(priv, REG_CR);
+ val16 &= 0xff00;
+ val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE);
+ rtl8xxxu_write16(priv, REG_CR, val16);
+
+ val16 = rtl8xxxu_read16(priv, REG_CR);
+ val16 &= ~CR_SECURITY_ENABLE;
+ rtl8xxxu_write16(priv, REG_CR, val16);
+
+ val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
+ val8 |= DUAL_TSF_TX_OK;
+ rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
+
+out:
+ return retval;
+}
+
+static int rtl8192eu_active_to_emu(struct rtl8xxxu_priv *priv)
+{
+ u8 val8;
+ int count, ret = 0;
+
+ /* Turn off RF */
+ rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
+
+ /* Switch DPDT_SEL_P output from register 0x65[2] */
+ val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
+ val8 &= ~LEDCFG2_DPDT_SELECT;
+ rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
+
+ /* 0x0005[1] = 1 turn off MAC by HW state machine*/
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+ val8 |= BIT(1);
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+ for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+ if ((val8 & BIT(1)) == 0)
+ break;
+ udelay(10);
+ }
+
+ if (!count) {
+ dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
+ __func__);
+ ret = -EBUSY;
+ goto exit;
+ }
+
+exit:
+ return ret;
+}
+
+static int rtl8192eu_emu_to_disabled(struct rtl8xxxu_priv *priv)
+{
+ u8 val8;
+
+ /* 0x04[12:11] = 01 enable WL suspend */
+ val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
+ val8 &= ~(BIT(3) | BIT(4));
+ val8 |= BIT(3);
+ rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
+
+ return 0;
+}
+
static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv)
{
u16 val16;
@@ -1446,6 +1554,40 @@ exit:
return ret;
}
+void rtl8192eu_power_off(struct rtl8xxxu_priv *priv)
+{
+ u8 val8;
+ u16 val16;
+
+ rtl8xxxu_flush_fifo(priv);
+
+ val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
+ val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
+ rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
+
+ /* Turn off RF */
+ rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
+
+ rtl8192eu_active_to_lps(priv);
+
+ /* Reset Firmware if running in RAM */
+ if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
+ rtl8xxxu_firmware_self_reset(priv);
+
+ /* Reset MCU */
+ val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
+ val16 &= ~SYS_FUNC_CPU_ENABLE;
+ rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
+
+ /* Reset MCU ready status */
+ rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
+
+ rtl8xxxu_reset_8051(priv);
+
+ rtl8192eu_active_to_emu(priv);
+ rtl8192eu_emu_to_disabled(priv);
+}
+
static void rtl8192e_enable_rf(struct rtl8xxxu_priv *priv)
{
u32 val32;
@@ -1487,7 +1629,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = {
.parse_efuse = rtl8192eu_parse_efuse,
.load_firmware = rtl8192eu_load_firmware,
.power_on = rtl8192eu_power_on,
- .power_off = rtl8xxxu_power_off,
+ .power_off = rtl8192eu_power_off,
.reset_8051 = rtl8xxxu_reset_8051,
.llt_init = rtl8xxxu_auto_llt_table,
.init_phy_bb = rtl8192eu_init_phy_bb,
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index 3555a2f..315ccfb 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -676,6 +676,7 @@
#define REG_SCH_TXCMD 0x05d0
/* define REG_FW_TSF_SYNC_CNT 0x04a0 */
+#define REG_SCH_TX_CMD 0x05f8
#define REG_FW_RESET_TSF_CNT_1 0x05fc
#define REG_FW_RESET_TSF_CNT_0 0x05fd
#define REG_FW_BCN_DIS_CNT 0x05fe
--
2.7.4
