Simon Wunderlich <sw@xxxxxxxxxxxxxxxxxx> writes: > we have done some experiments last week on ath10k, trying to run mesh > (802.11s) and access point at the same time, both encrypted. > > We have tested a recent LEDE (reboot-1519-g42f559e) but with > firmware-5.bin_10.2.4.70.42-2 and the included wpa_supplicant, which gave us a > working encrypted 802.11s network. However, starting an AP at the same time > didn't work (AP doesn't beacon). This wasn't a problem when 802.11s was > running unencrypted. > > We also tested version 10.2.4.97 (from codeaurora), which is now default in > LEDE. However, this version apparently doesn't support 11s mesh at all > (WMI_SERVICE_MESH_11S is disabled in the service map, but cfg/mac80211 > advertises support). > > So here are my questions: > > * Did anyone succesfully run AP and mesh, both encrypted at the same time? > * Do you have any pointers how we could fix this? Could it be fixable in the > driver (i.e. not in firmware)? > * Does anyone have an idea if 11s will be supported in future versions? I > didn't find any changelogs, but having 11s mode no longer in the service map > does not make me optimistic. Why is LEDE using 10.2.4.97? It seems to be a quite old release and I have no knowledge if anyone even tests that firmware branch with ath10k. I recommend to only use firmware releases from ath10k-firmware.git as we use those internally with ath10k. In any case, don't make any assumptions about future from that firmware branch as it's so old. -- Kalle Valo