On Sat, May 24, 2008 at 07:27:35PM -0400, Jerry Quinn wrote: > Hi. I just installed compat-wireless 2008-05-24. > > The good news is that ath5k now loads into the kernel and can talk to the > chip. However, beyond that, the device doesn't do anything. During > modprobe ath5k, I get > > > ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:03:00.0 to 64 > ath5k_pci 0000:03:00.0: registered as 'phy1' > phy1: Selected rate control algorithm 'pid' > ath5k phy1: Atheros AR5424 chip found (MAC: 0xa3, PHY: 0x61) > udev: renamed network interface wlan0 to ath0 > > The pci id for the chip is 168c:1014 (rev 01). This is an IBM Thinkpad > T60p, running Debian testing with kernel 2.6.25-2-686, the latest dist > kernel available. > > When I try to bring up the interface I just get a link is not ready message > in the kernel log with no other info. Also, iwlist ath0 scan gives me no > results either (I did ifconfig ath0 up beforehand). > > Let me know if there's any further diagnosis I can provide to help out. You might wish to post the results of running the ath_info tool available from the madwifi project (sorry, I don't have the URL handy). John -- John W. Linville linville@xxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
