On Fri, Jul 22, 2016 at 5:29 PM, Manoharan, Rajkumar <rmanohar@xxxxxxxxxxxxxxxx> wrote: > [...] >> >> Thanks Raj, with this fix the rates are 0-7, if i disable then i am >> >> seeing 0-9, so its >> >> working. >> >> >> >> But i am seeing a weird issues, the moment i give bitrates command, >> >> ath10k no longer does encryption, link is a WPA2-PSK: AES. Even after >> >> interface up/down >> >> it doesn't work. >>> After reboot i dont see the "unencrypted" packet issue, i will do >>> some more testing on limiting the rates, currently in my setup its >>> not reaching MCS9 so cannot verify now. >> Rajkumar, >> >> I am still not able to make mcs9 work, so i have tried to change the Nss to 1 >> using iw, but that is not taking affect. This command is not taking effect. >> > you mean not able to fix VHT rates alone. am i right? By auto rate mode, is firmware selecting > mcs9? What is the command used for fixing vht rate? Basically my requirement is to disable MCS8 and 9 for comparison. to check whether ath10k honors the iw command, i used below command. changing to 1SS, but i could see that it still transmits using 2SS. Does your patch ignore these settings except for adhoc mode? iw set bitrates vht-mcs-5 1:0-7 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
