On Sun, Jul 10, 2016 at 08:32:40AM +0000, Reizer, Eyal wrote: > Add support for using with both wl12xx and wl18xx. > > - all wilink family needs special init command for entering wspi mode. > extra clock cycles should be sent after the spi init command while the > cs pin is high. > - Use inverted chip select for sending a dummy 4 bytes command that > completes the init stage. > > Signed-off-by: Eyal Reizer <eyalr@xxxxxx> > --- > v1->v2:update device tree bindings configuration > v2->v3:revert from manual gpio manipulation. use inverted chip select instead > for sending the extra init cycle which, achieves the same hardware purpose. > update device tree bindings docucmentation accordingly > v3->v4: Remove redundant data form binding documentation and fix chip select > number mismatch in wl1271 example > v4->v5: Rebase on top of head of wireless-drivers-next Please add acks when reposting. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
