Search Linux Wireless

[PATCH v3 09/10] rtlwifi: rtl8192de: Convert driver to use common hardware info routine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The driver for RTL8192DE chips is converted to use the common routine
for getting the hardware information.

Reported-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
---
V2 - Fixes bug found after V1 was submitted.
V3 - No changes.

This patch requires ("rtlwifi: Add missing newlines to RT_TRACE calls")
	submitted by Joe Perches.
---
 .../net/wireless/realtek/rtlwifi/rtl8192de/hw.c    | 77 +++++-----------------
 1 file changed, 15 insertions(+), 62 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
index 8618c32..b0f6324 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c
@@ -1744,71 +1744,26 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
-	struct device *dev = &rtl_pcipriv(hw)->dev.pdev->dev;
-	u16 i, usvalue;
-	u8 hwinfo[HWSET_MAX_SIZE];
-	u16 eeprom_id;
-	unsigned long flags;
+	int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
+			EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D,
+			EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+			COUNTRY_CODE_WORLD_WIDE_13};
+	int i;
+	u16 usvalue;
+	u8 *hwinfo;
 
-	switch (rtlefuse->epromtype) {
-	case EEPROM_BOOT_EFUSE:
-		spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
-		rtl_efuse_shadow_map_update(hw);
-		_rtl92de_efuse_update_chip_version(hw);
-		spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
-		break;
-	case EEPROM_93C46:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "RTL819X Not boot from eeprom, check it !!\n");
-		return;
-	default:
-		dev_warn(dev, "no efuse data\n");
+	hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
+	if (!hwinfo)
 		return;
-	}
-
-	memcpy(hwinfo, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE);
-	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
-		      hwinfo, HWSET_MAX_SIZE);
 
-	eeprom_id = *((u16 *)&hwinfo[0]);
-	if (eeprom_id != RTL8190_EEPROM_ID) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
-			 "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
-		rtlefuse->autoload_failflag = true;
-	} else {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
-		rtlefuse->autoload_failflag = false;
-	}
-	if (rtlefuse->autoload_failflag) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "RTL819X Not boot from eeprom, check it !!\n");
+	if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params))
 		return;
-	}
-	rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
-	_rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
 
-	/* VID, DID  SE     0xA-D */
-	rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
-	rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
-	rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
-	rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROMId = 0x%4x\n", eeprom_id);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
+	_rtl92de_efuse_update_chip_version(hw);
+	_rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
 
-	/* Read Permanent MAC address */
-	if (rtlhal->interfaceindex == 0) {
-		for (i = 0; i < 6; i += 2) {
-			usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i];
-			*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
-		}
-	} else {
+	/* Read Permanent MAC address for 2nd interface */
+	if (rtlhal->interfaceindex != 0) {
 		for (i = 0; i < 6; i += 2) {
 			usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
 			*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
@@ -1834,10 +1789,8 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
 		rtlefuse->channel_plan = COUNTRY_CODE_FCC;
 		break;
 	}
-	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
 	rtlefuse->txpwr_fromeprom = true;
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
+	kfree(hwinfo);
 }
 
 void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux