From: Meirav Kama <meiravk@xxxxxx>
There are several values in HT info elements of mesh beacon (built by the
mac80211) that are incorrect.
To fix them:
1. mac80211 will check configuration from cfg and will build accordingly.
2. changes made in mesh default values.
Signed-off-by: Meirav Kama <meiravk@xxxxxx>
Acked-by: Yaniv Machani <yanivma@xxxxxx>
---
net/mac80211/mesh.c | 33 ++++++++++++++++++++++++++++++++-
net/mac80211/util.c | 3 ---
net/wireless/mesh.c | 2 +-
3 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 1f5be54..1b63b11 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -423,6 +423,8 @@ int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
enum nl80211_band band = ieee80211_get_sdata_band(sdata);
struct ieee80211_supported_band *sband;
u8 *pos;
+ u16 cap;
+
sband = local->hw.wiphy->bands[band];
if (!sband->ht_cap.ht_supported ||
@@ -431,11 +433,40 @@ int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
+ /* determine capability flags */
+ cap = sband->ht_cap.cap;
+
+ /* if channel width is 20MHz - configure HT capab accordingly*/
+ if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_DSSSCCK40;
+ }
+
+ /* set SM PS mode properly */
+ cap &= ~IEEE80211_HT_CAP_SM_PS;
+ switch (sdata->smps_mode) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_NUM_MODES:
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:
+ cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ }
+
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
- ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
+ ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, cap);
return 0;
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 42bf0b6..5375a82 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2349,10 +2349,7 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap,
ht_oper->operation_mode = cpu_to_le16(prot_mode);
ht_oper->stbc_param = 0x0000;
- /* It seems that Basic MCS set and Supported MCS set
- are identical for the first 10 bytes */
memset(&ht_oper->basic_set, 0, 16);
- memcpy(&ht_oper->basic_set, &ht_cap->mcs, 10);
return pos + sizeof(struct ieee80211_ht_operation);
}
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index fa2066b..ac19a19 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -70,7 +70,7 @@ const struct mesh_config default_mesh_config = {
.dot11MeshGateAnnouncementProtocol = false,
.dot11MeshForwarding = true,
.rssi_threshold = MESH_RSSI_THRESHOLD,
- .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
+ .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE,
.dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
.dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
.dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
